BRACKET ASSEM. 8K8544 - Caterpillar

Machine Control
Illustration 1 g01362679
The three-position switches are spring centered. There is a switch on each side of the machine near the tow point cylinders. There is another set of switches in the screed control boxes.The tow point control will be located near the tow point cylinder. The exact location may vary depending on the model.In order to retract the cylinder, move the switch UP.In order to extend the cylinder, move the switch DOWN.When the switch is released the switch will return to the CENTER position.Screed Control Box
Illustration 2 g01362682
Right control boxThere are two switches for tow point control that are located in the screed control boxes. The tow point control for the left tow point cylinder is located in the left screed control box. The tow point control for the right tow point cylinder is located in the right screed control box.