BRACKET 8N7648 - Caterpillar

Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
Radar enclosures part numbers 340-0575 Object Detection Box Gp and 339-9793 Object Detection Box Gp will not accept sensors due to manufacturing defects.Solution
Replace with the same part. The following parts show example of defects:Radar Enclosure 1
Illustration 1 g03666004
339-9793 Object Detection Box Gp 339-9793 Object Detection Box Gp the enclosure shown on Illustration 1 will not accept the sensor due to the cutout for the sensor pig tail not being present.Radar Enclosure 2
Illustration 2 g03666018
340-0575 Object Detection Box Gp
Illustration 3 g03666036
340-0575 Object Detection Box Gp 340-0575 Object Detection Box Gp shown on the Illustration 2 will not accept the sensor due to some dimensional issues. There must be less than 3 mm (0.12 inch) gap between the bolt and the sensor stop as shown in Illustration 3.