BRACKET 9D3693 - Caterpillar

Illustration 56 g06120042
Side view of filter group
(5) 267-5286 Air Lines Filter Gp
(8) 2H-3940 Elbow
(19) 455-5885 Hose As
Install elbow (8) to filter group (5). Install hose assembly (19) to elbow (8).
Illustration 57 g06120077
Overview of hose routing
(19) 455-5885 Hose As
Illustration 58 g06120099
Rear view of hose routing
(B) Hardware
(12) 1S-0994 Clip
(13) 8T-4896 Hard Washer
(14) 5M-3062 Bolt
(19) 455-5885 Hose As
Route hose assembly (19) around base of left-hand rear pedestal. Position two clips (12) and secure with existing hardware (B), one washer (13), and one bolt (14).
Illustration 59 g06120199
Side view of hose routing
(C) Clip and Hardware
(12) 1S-0994 Clip
(15) 8S-0948 Clip
(19) 455-5885 Hose As
Route hose assembly (19) up left-hand rear pedestal. Install to cab in place of discarded hose (A) from step 2 of this procedure.
Position clip (C), one clip (15), and two clips (12). Secure with existing hardware.Note: Clip (12) at detail (DD) needs to be flipped 180 degrees to prevent possible hose rub.
Illustration 60 g06120233
Side view of filter group
(5) 267-5286 Air Lines Filter Gp
(9) 2S-5100 Manual Valve
(10) 2H-9091 Pipe Connector
(18) 455-5888 Hose As
Install valve (9) and connector (10) to filter group (5). Install hose assembly (18) to connector (10).
Illustration 61 g06120220
Overview of hose routing
(18) 455-5888 Hose As
Illustration 62 g06120582
Bottom view of hose routing
(5) 267-5286 Air Lines Filter Gp
(13) 8T-4896 Hard Washer
(15) 8S-0948 Clip
(16) 133-6934 Spacer
(17) 5S-7383 Bolt
(18) 455-5888 Hose As
Route hose assembly (18) under frame and up left-hand inner frame rail. Position one clip (15) and secure one spacer (16), one washer (13), and one bolt (17).
Illustration 63 g06120657
Side view of hose routing
(D) Clip
(12) 1S-0994 Clip
(13) 8T-4896 Hard Washer
(14) 5M-3062 Bolt
(15) 8S-0948 Clip
(18) 455-5888 Hose As
Route hose assembly (18) up left-hand rear pedestal. Position clip (D), one clip (15), and uppermost clip (12). Secure with existing hardware.Note: Clip (15) at detail (EE) needs to be flipped 180 degrees to prevent possible hose rub.
Position lower clip (12) and secure with one washer (13) and one bolt (14).
Illustration 64 g06120689
Bottom view of hose routing
(E) clipping points
(18) 455-5888 Hose As
Route hose assembly (18) along main beam up to air tank. Secure using retained clipping points and hardware (E) from removal of hose (A) in step 2 earlier in the procedure.
Illustration 65 g06120712
Rear-Side view of hose routing
(F) clipping points
(18) 455-5888 Hose As
Install hose assembly (18) to air tank. Secure using retained clipping points and hardware (F) from removal of hose (A) in step 2 earlier in the procedure.