9R0343 BRACKET AS-LIFT Caterpillar parts
414E, 416B, 416C, 416D, 416E, 420D, 422E, 424B, 424D, 426C, 428B, 428C, 428D, 430D, 438C
Rating:
Alternative (cross code) number:
CA9R0343
9R-0343
9R0343
CA9R0343
9R-0343
9R0343
Weight: 0.15 pounds 0 kg.
BACKHOE LOADER,
Compatible equipment models: 9R0343:
Information:
is open. Repair: Repair the machine harness or repair the machine harness. Stop.Test Step 3. VERIFY THE GROUND OF THE JOYSTICK.
At the machine harness connector of the left side attachment pedal, place a jumper between contact 2 (wire M948-BR) and frame ground.
At the machine harness connector J1, measure the resistance between contact J1-9 (wire M948-BR) and frame ground. Expected Result:The resistance is less than 5 ohms. Results:
OK - The resistance is less than 5 ohms. The circuit resistance is correct. Proceed to Test Step 4.
NOT OK - The resistance is greater than 5 ohms. The circuit resistance is not correct. The harness is open. Repair: Repair the machine harness or replace the machine harness. Stop.Test Step 4. CHECK THE SIGNAL CIRCUIT FOR THE LEFT SIDE ATTACHMENT PEDAL
Remove the jumper that was placed in the previous test.
At the machine harness connector for the left side attachment pedal, place a jumper between contact 3 (wire M954-BU) and frame ground.
At the machine harness connector J1, measure the resistance between contact J1- 4 (wire M954-BU) and frame ground.Expected Result:The resistance is less than 5 ohms. Results:
OK - The resistance is less than 5 ohms. The circuit resistance is correct. Proceed to Test Step 5.
NOT OK - The resistance is greater than 5 ohms. The circuit resistance is not correct. The harness is open. Repair: Repair the machine harness or replace the machine harness. Stop.Test Step 5. CHECK THE MACHINE HARNESS FOR A SHORT CIRCUIT.
Remove the jumper wire that was placed in the previous test.
At the machine harness connector J1, measure the resistance between contact J1-4 (wire M954-BU) and frame ground. Expected Result:The resistance is greater than 5000 ohms. Results:
OK - The resistance is greater than 5000 ohms. The resistance is correct. Proceed to Test Step 6.
NOT OK - The resistance is less than 5000 ohms. The resistance is not correct. The harness is shorted to ground. Repair: Repair the machine harness or replace the machine harness. Stop.Test Step 6. CHECK THE HARNESS FOR A SHORT IN THE CIRCUIT FOR THE LEFT SIDE ATTACHMENT PEDAL.
Measure the resistance between the circuits that are listed:
At the machine harness connector of the left side attachment pedal, measure the resistance between contact 3 (wire M954-BU) and the case of the left side attachment pedal.
At the machine harness connector of the left side attachment pedal, measure the resistance between contact 1 (wire M947-OR) and the case of the left side attachment pedal.
At the machine harness connector of the left side attachment pedal, measure the resistance between contact 2 (wire M948-BR) and the case of the left side attachment pedal. Note: Use an unpainted surface of the left side attachment pedal for this measurement. Expected Result:The resistance is greater than 5000 ohms. Results:
OK - The resistance is greater than 5000 ohms. The resistance of the circuit is correct. Proceed to Test Step 7.
NOT OK - The resistance is less than 5000 ohms. The resistance of the circuit is not correct. The left side attachment pedal has failed. Repair:
At the machine harness connector of the left side attachment pedal, place a jumper between contact 2 (wire M948-BR) and frame ground.
At the machine harness connector J1, measure the resistance between contact J1-9 (wire M948-BR) and frame ground. Expected Result:The resistance is less than 5 ohms. Results:
OK - The resistance is less than 5 ohms. The circuit resistance is correct. Proceed to Test Step 4.
NOT OK - The resistance is greater than 5 ohms. The circuit resistance is not correct. The harness is open. Repair: Repair the machine harness or replace the machine harness. Stop.Test Step 4. CHECK THE SIGNAL CIRCUIT FOR THE LEFT SIDE ATTACHMENT PEDAL
Remove the jumper that was placed in the previous test.
At the machine harness connector for the left side attachment pedal, place a jumper between contact 3 (wire M954-BU) and frame ground.
At the machine harness connector J1, measure the resistance between contact J1- 4 (wire M954-BU) and frame ground.Expected Result:The resistance is less than 5 ohms. Results:
OK - The resistance is less than 5 ohms. The circuit resistance is correct. Proceed to Test Step 5.
NOT OK - The resistance is greater than 5 ohms. The circuit resistance is not correct. The harness is open. Repair: Repair the machine harness or replace the machine harness. Stop.Test Step 5. CHECK THE MACHINE HARNESS FOR A SHORT CIRCUIT.
Remove the jumper wire that was placed in the previous test.
At the machine harness connector J1, measure the resistance between contact J1-4 (wire M954-BU) and frame ground. Expected Result:The resistance is greater than 5000 ohms. Results:
OK - The resistance is greater than 5000 ohms. The resistance is correct. Proceed to Test Step 6.
NOT OK - The resistance is less than 5000 ohms. The resistance is not correct. The harness is shorted to ground. Repair: Repair the machine harness or replace the machine harness. Stop.Test Step 6. CHECK THE HARNESS FOR A SHORT IN THE CIRCUIT FOR THE LEFT SIDE ATTACHMENT PEDAL.
Measure the resistance between the circuits that are listed:
At the machine harness connector of the left side attachment pedal, measure the resistance between contact 3 (wire M954-BU) and the case of the left side attachment pedal.
At the machine harness connector of the left side attachment pedal, measure the resistance between contact 1 (wire M947-OR) and the case of the left side attachment pedal.
At the machine harness connector of the left side attachment pedal, measure the resistance between contact 2 (wire M948-BR) and the case of the left side attachment pedal. Note: Use an unpainted surface of the left side attachment pedal for this measurement. Expected Result:The resistance is greater than 5000 ohms. Results:
OK - The resistance is greater than 5000 ohms. The resistance of the circuit is correct. Proceed to Test Step 7.
NOT OK - The resistance is less than 5000 ohms. The resistance of the circuit is not correct. The left side attachment pedal has failed. Repair:
Cat SIS web machinery list:
Parts bracket Caterpillar catalog:
6I1206
BRACKET-SHAFT
212, 3054, 3054B, 3056, 3056E, 307, 312, 312B L, 312C, 315, 315B L, 317, 416B, 416C, 416D, 420D, 424D, 426B, 426C, 428B, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 550B, 554, 560B, 564, 574B, 908...
212, 3054, 3054B, 3056, 3056E, 307, 312, 312B L, 312C, 315, 315B L, 317, 416B, 416C, 416D, 420D, 424D, 426B, 426C, 428B, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 550B, 554, 560B, 564, 574B, 908...
7C1281
BRACKET
120M, 12M, 2470C, 3054, 3054B, 3054C, 3054E, 3056, 3056E, 307, 312, 312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP, 315, 315B L, 315C, 317, 318D2 L, 320D GC, 320D L, 320D2, 320D2 L, 323D L, 414E, 416B, 41...
120M, 12M, 2470C, 3054, 3054B, 3054C, 3054E, 3056, 3056E, 307, 312, 312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP, 315, 315B L, 315C, 317, 318D2 L, 320D GC, 320D L, 320D2, 320D2 L, 323D L, 414E, 416B, 41...
9R8757
BRACKET
416B, 416C, 426B, 426C, 436C
416B, 416C, 426B, 426C, 436C
1014015
BRACKET
416D, 420D, 424D, 428B, 428C, 428D, 430D, 432D, 438C, 438D, 442D
416D, 420D, 424D, 428B, 428C, 428D, 430D, 432D, 438C, 438D, 442D
1307282
BRACKET
414E, 416C, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424D, 426C, 428C, 428D, 428E, 428F, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 434F, 436C, 438C, 438D, 442D, 442E, 444E, 444F, 446D, TH340B, ...
414E, 416C, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424D, 426C, 428C, 428D, 428E, 428F, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 434F, 436C, 438C, 438D, 442D, 442E, 444E, 444F, 446D, TH340B, ...
1473019
BRACKET
216, 228, 236, 247, 248, 267, 287, 416C, 416D, 420D, 424D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 446D, 725, 725C, 730, 730C, 735, 735B, 740, 740B, 770, 772, 844H, 854K, 990H, 992K, 994...
216, 228, 236, 247, 248, 267, 287, 416C, 416D, 420D, 424D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 446D, 725, 725C, 730, 730C, 735, 735B, 740, 740B, 770, 772, 844H, 854K, 990H, 992K, 994...
3312309
BRACKET AS
424B, 424B HD
424B, 424B HD
2872749
BRACKET AS
424B
424B
2372645
BRACKET AS
424B, 424B HD
424B, 424B HD
9R9094
BRACKET
428B
428B
9R9093
BRACKET
428B
428B
1060587
BRACKET
428B
428B
9R0336
BRACKET AS-LIFT
414E, 416B, 416C, 416D, 416E, 420D, 422E, 424B, 424D, 426C, 428B, 428C, 428D, 430D, 438C
414E, 416B, 416C, 416D, 416E, 420D, 422E, 424B, 424D, 426C, 428B, 428C, 428D, 430D, 438C
1318775
BRACKET AS
416B, 416C, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 424D, 426B, 426C, 428B, 428C, 428D, 428E, 430D, 430E, 430F, 432D, 432E, 434E, 436C, 438C, 438D, 442D, 442E, 444E
416B, 416C, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 424D, 426B, 426C, 428B, 428C, 428D, 428E, 430D, 430E, 430F, 432D, 432E, 434E, 436C, 438C, 438D, 442D, 442E, 444E
9R8757
BRACKET
416B, 416C, 426B, 426C, 436C
416B, 416C, 426B, 426C, 436C
1031146
BRACKET AS
416B, 426B, 426C, 428B, 438B
416B, 426B, 426C, 428B, 438B
9R9316
BRACKET AS
416B, 416C, 416D, 420D, 424D, 426B, 426C, 428B, 428C, 428D, 430D, 436C, 438B, 438C
416B, 416C, 416D, 420D, 424D, 426B, 426C, 428B, 428C, 428D, 430D, 436C, 438B, 438C
1010502
BRACKET AS
416B, 426B, 426C, 428B, 438B
416B, 426B, 426C, 428B, 438B
1102861
BRACKET
414E, 416B, 416C, 416D, 416E, 416F, 420D, 422E, 422F, 424D, 426B, 426C, 428B, 428C, 428D, 428E, 428F, 430D, 432D, 432E, 432F, 436C, 438B, 438C, 438D, 442D, 442E
414E, 416B, 416C, 416D, 416E, 416F, 420D, 422E, 422F, 424D, 426B, 426C, 428B, 428C, 428D, 428E, 428F, 430D, 432D, 432E, 432F, 436C, 438B, 438C, 438D, 442D, 442E
1046314
BRACKET
414E, 416B, 416C, 416D, 416E, 420D, 424D, 426B, 426C, 428B, 428C, 428D, 430D, 432D, 436C, 438B, 438C, 438D, 442D
414E, 416B, 416C, 416D, 416E, 420D, 424D, 426B, 426C, 428B, 428C, 428D, 430D, 432D, 436C, 438B, 438C, 438D, 442D
1069388
BRACKET
414E, 416B, 416C, 416D, 416E, 416F, 420D, 422E, 422F, 424D, 426B, 426C, 428B, 428C, 428D, 428E, 428F, 430D, 432D, 432E, 432F, 436C, 438B, 438C, 438D, 442D, 442E
414E, 416B, 416C, 416D, 416E, 416F, 420D, 422E, 422F, 424D, 426B, 426C, 428B, 428C, 428D, 428E, 428F, 430D, 432D, 432E, 432F, 436C, 438B, 438C, 438D, 442D, 442E
1046313
BRACKET AS
414E, 416B, 416C, 416D, 416E, 416F, 420D, 422E, 422F, 424D, 426B, 426C, 428B, 428C, 428D, 428E, 428F, 430D, 432D, 432E, 432F, 436C, 438B, 438C, 438D, 442D, 442E
414E, 416B, 416C, 416D, 416E, 416F, 420D, 422E, 422F, 424D, 426B, 426C, 428B, 428C, 428D, 428E, 428F, 430D, 432D, 432E, 432F, 436C, 438B, 438C, 438D, 442D, 442E
9R7565
BRACKET AS
416, 416B, 416C, 416D, 420D, 422E, 424D, 426B, 426C, 428B, 428C, 428D, 428E, 432D, 432E, 434E, 436C, 438B, 438C, 442D, 442E, 444E
416, 416B, 416C, 416D, 420D, 422E, 424D, 426B, 426C, 428B, 428C, 428D, 428E, 432D, 432E, 434E, 436C, 438B, 438C, 442D, 442E, 444E
9R7564
BRACKET AS
416, 416B, 416C, 416D, 420D, 422E, 424D, 426B, 426C, 428B, 428C, 428D, 428E, 432D, 432E, 434E, 436C, 438B, 438C, 442D, 442E, 444E
416, 416B, 416C, 416D, 420D, 422E, 424D, 426B, 426C, 428B, 428C, 428D, 428E, 432D, 432E, 434E, 436C, 438B, 438C, 442D, 442E, 444E