BRACKET AS 9R7782 - Caterpillar

When working in or around any body of water, around a stream or river, or in conditions of heavy mud, be careful that the swing bearing, the swing drive gear, and the swivel joint do not dip into water, mud, sand, or gravel. If the swing bearing dips into water, mud, sand, or gravel, immediately grease the swing bearing until the used grease leaks from the outer circle of the swing bearing. Failure to carry out this procedure may cause premature wear in the swing bearing.
Illustration 1 g00807842
Depth of water to the center of the track carrier rollerThe following guidelines pertain to travel across water and travel through mud, sand, or gravel.The machine can travel across a river only under the following conditions:
The bed of the river is flat.
The flow of the river is slow.
The machine dips into the water only to the center of the track carrier roller (dimension A).While you cross the river, carefully confirm the depth of the water with the work tool. Do not move the machine into an area that has a water depth that is greater than Dimension A.The machine may sink gradually on soft ground. Therefore, you should frequently check the height of the undercarriage from ground level and the depth of water on the ground.Check the swing gear by looking through the inspection cover that is on the upper frame. If there is water in the swing gear, consult your Cat dealer for the required maintenance on the swing gear.After you travel through water, carefully clean the machine in order to remove any salt, sand, or other foreign matter.