BRAKE GP-HYDRAULIC CALIPER 1516856 - Caterpillar

Illustration 1 g01117733
The Product Identification Number (PIN) for the tractor is located on the right side of the tractor frame. Plate (1) is below the operator compartment. Plate (1) will have the following information:Model number____________________PIN____________________Engine model number____________________Engine serial number____________________Engine arrangement number____________________Transmission model number____________________Transmission serial number____________________Transmission arrangement number____________________
Illustration 2 g00930241
The Product Identification Number (PIN) for the scraper is located on the left side of the bowl. Plate (2) is located above the draft arm. Plate (2) will have the following information:Model number____________________PIN____________________
Illustration 3 g00929722
Plate (3) for the transmission serial number is located on the back side of the transmission.Transmission Serial Number____________________
Illustration 4 g01116553
Plate (4) for the engine serial number can be found on the right side of the tractor frame. The serial number for the engine can also be found on the right side of the engine block.Engine Serial Number____________________Certification
ROPS/FOPS Structure
This message is positioned on the ROPS.
Illustration 5 g01211895
Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.
This machine has been certified to the standards that are listed on the certification film. The maximum mass of the machine, which includes the operator and the attachments without a payload, should not exceed the mass on the certification film.Refer to Operation and Maintenance Manual, "Guards (Operator Protection)" for more information.European Union
Illustration 6 g01880193
This plate is positioned on the bottom left side of plate (1) for the PIN.Note: The CE plate is on machines that are certified to the European Union requirements that were effective at that time.For machines compliant to 2006/42/EC, the following information is stamped onto the CE plate. For quick reference, record this information in the spaces that are provided below.
Engine Power Primary Engine (kW)____________________
Engine Power for Additional Engine (If Equipped) ____________________
Typical Machine Operating Weight for European Market (kg)____________________
Year of Construction____________________
Machine Type ____________________
Illustration 7 g01120192
This plate is positioned on the bottom left side of plate (1) for the PIN.Note: The CE plate is on machines that are certified to the European Union requirements that were effective at that time.For machines compliant to 98/37/EC and 89/392/EEC, the following information is stamped onto the CE plate. For quick reference, record this information in the spaces that are provided below.
Engine Power Primary Engine (kW)____________________
Typical Machine Operating Weight for European Market (kg)____________________
Year of Construction____________________For the name and address of the manufacturer, and the country of origin of the machine, refer to the PIN plate.Product Link
If equipped, this message is used to verify the certification of the Product Link as a RF transmitter. The following specifications are provided to aid in ensuring compliance with all local regulations:
Table 1
Operating frequency range     148 to 150 MHz    
Transmitter power     5 Watts    
Illustration 8 g01222547
This message is located on the control group for the Product Link. The control group is located on the cab rear wall to the right of the operator seat.If the machine is required to work within