BRAKE GP-SERVICE & PARKING 3236387 - Caterpillar

Illustration 1 g02838117
Right side view
Table 1
Specification for 337-0068 Engine Oil Lines Gp, and 301-4081 Engine Oil Lines Gp
Item Qty Part Specification Description
3 1 240-1919 Tube As Use the following procedure to tighten the clamp assembly to the tube assembly:
1. Snugly tighten the clamp assembly (2) to the tube assembly (3).
2. Tighten two bolts (1) of the clamp assembly to the tube assembly (3) to 47 9 N m (35 7 lb ft).
3. Tighten two bolts (5) of the clamp assembly to the tube assembly to 47 9 N m (35 7 lb ft).
7 1 244-5867 Elbow Use the following procedure to tighten the clamp assembly to the elbow:
1. Tighten two bolts (1) of the clamp assembly to the elbow (7) to 47 9 N m (35 7 lb ft).
1. Tighten two bolts (5) of the clamp assembly to the elbow (7) to 47 9 N m (35 7 lb ft).
4 4 109-2332 O-Ring Seal Lubricate the bore lightly with the fluid that is being sealed.
6 2 6B-9202 Spring Length under test force is 68.3 mm (2.69 inch).
Test force is 84.5 to 99.6 N (19.0 to 22.4 lb).
Free length after test is 112.8 mm (4.44 inch).
- - - The cooling jet sequence valves must start to open at a pressure difference of 130 30 kPa (19 4 psi).
The cooling jet sequence valves must be fully open at a pressure difference of 200 30 kPa (29 4 psi).
Illustration 2 g02838156
Top view
Illustration 3 g02838157
View of area A with elbow removed
Table 2
Item Qty Part Specification Description
8 1 2W-1053 Plug Torque to 100 15 N m (74 11 lb ft).
9 2 237-7623 O-Ring Seal Lubricate the bore lightly with the fluid that is being sealed.
10 1 124-4273 Bypass Valve The oil cooler bypass valve must open with a pressure difference of 180 20 kPa (26 3 psi).
11 1 2W-1635 Spring Length under test force is 102.0 mm (4.02 inch).
Test force is 518 26 N (116 6 lb).
Free length after test is 143.4 mm (5.65 inch).