BRAKE 5354292 - Caterpillar

This Revised Service Letter replaces the 05Aug2013 Service Letter. Changes have been made to the Affected Product and Service Claim Allowances.
TERMINATION DATE
31Aug2015
PROBLEM
The existing bracket may be installed incorrectly on certain D10T Track-Type Tractors. If the bracket is installed incorrectly, it may allow the tube to come into contact with other parts on the engine.
AFFECTED PRODUCT
Model Identification Number
D10T RJG00289-00290, 613-614, 631-634, 780, 917, 950, 952, 988, 1167, 1252, 1290, 1424, 1478, 1487, 1495, 1497, 1586-1587, 1707, 1750, 1831, 1834, 1851, 1867, 1993, 2054, 2062, 2064, 2203, 2341, 2436, 2536, 2568, 2678, 2795, 2813, 3119, 4002, 4009, 4012, 4026, 4057, 4272, 4277, 4294, 4303, 4530, 4533-4534, 4680-4682, 4704-4706, 4710
PARTS NEEDED
Qty
Part Number Description
1 6V2381 CLIP-2 PIECE
1 6V2382 CLIP-2 PIECE
1 3819658 BRACKET AS
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 7% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
Inspect the location of the 235-8751 Bracket (clamp bracket) on the right hand fumes disposal tube. If the clamp bracket is located on the bottom of the mounting plate, remove and reinstall the clamp bracket (and associated clip, hardware, etc) to the top of the mounting plate per the following illustration. Ensure there is at least 25mm of clearance between the fumes disposal tube and the fuel hose.
Image1
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-10000 hrs,
0-60 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 2.0-hour job
If there has been a previous repair, part age/hours will apply. Retain a copy of the previous repair invoice in the dealer's records for audit purposes, and specify repair date and machine hours in the "Additional Comments" section of the warranty claim.
This letter allows for 2.0 hours to inspect the bracket installation and correct the installation if necessary.
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.