BRAKE KT-SEAL 5655661 - Caterpillar

Removal Procedure
Start By:
Remove the hood. Refer to Disassembly and Assembly, "Hood - Remove".
Illustration 1 g01326635
Attach a suitable lifting device to the rear of the engine. The weight of the engine is approximately 238 kg (525 lb). Apply slight tension to the suitable lifting device.
Illustration 2 g01326638
Remove bolt (1). Use the suitable lifting device in order to raise the rear of the engine by approximately 25 mm (1.00 inch). Remove rear engine mount (2) .Installation Procedure
Illustration 3 g01326635
Illustration 4 g01326638
Install rear engine mount (2). Use the suitable lifting device in order to lower the rear of the engine onto mount (2). Install bolt (1). Tighten bolt (1) to a torque of 270 40 N m (200 30 lb ft). Repeat for the other side. Remove the suitable lifting device.End By: Install the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".