BREAKER (15 amp) 6N8589 - Caterpillar

Stopping the engine immediately after the engine has been working under load, can result in overheating and accelerated wear of the engine components.Avoiding hot engine shutdowns will maximize turbocharger shaft and bearing life.
Note: Individual applications have different control systems
Remove the load from the engine.
Open the circuit breaker.
Press the "Stop" button. The engine will enter cool down, and run for a pre-programmed period before stopping. If the engine has not been on load, cooldown can be bypassed by holding the "Stop" button for 3 seconds, then pressing the "OK" key.Note: Do not bypass cool down on a hot engine as accelerated wear of engine components can result.Note: Some engines will have a cool down timer built into the control panel logic. The cool down timer will allow the unit to continue to run for a set amount of time in a no load condition. The emergency stop overrides this function, however using the emergency override is not advised unless in an emergency. The cool down timer allows the engine and components to cool sufficiently before switching off, and is designed to prevent damage.