AVSPARE.COM
parts catalog

BREATHER 0005244 - Caterpillar



0005244 BREATHER Caterpillar parts BREATHER
Rating:
66
Alternative (cross code) number:
CA0005244
000-5244
0005244
Caterpillar 0005244 BREATHER
Weight: 0.03 pounds 0 kg.

Buy BREATHER 0005244 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Installation Procedure
Note: Clean all parts. Remove paint from any mating surfaces.
Remove the drawbar from the machine (if equipped).Note: The weight of the drawbar is 113.61 kg (250.50 lb).
Illustration 1 g01296915
Install two dowels (13) in the machine frame for the lower links. The dowels should be installed to a depth of 25.0 1.5 mm (0.98 0.06 inch).
Use bolts (2) and washers (1) in order to install bracket assemblies (11) and (12). Use spacers (3) and (4), as required. Tighten bolts (2) to a torque of 530 70 N m (390.9 51.6 lb ft).
Use bolts (15) and locknuts (6) in order to install pins (10). Do not tighten the bolts at this time.
Use bolts (2) and washers (1) in order to install plate assemblies (8) and (9). Use spacers (16) and (17), as required. Tighten bolts (2) to a torque of 530 70 N m (390 50 lb ft).
Use bolts (7) and locknuts (14) in order to install pins (5). Do not tighten the bolts at this time.
Illustration 2 g01296624
Use fittings (21), pins (5), bolts (7), and locknuts (14) in order to install link assemblies (30) to plate assemblies (8) and (9). Tighten bolts (7) to a torque of 60 12 N m (44 9 lb ft). Install the other end of link assemblies (30) to carriage assembly (33), using pins (32), bolts (31), washers (35), and locknuts (25) .Note: Insert pins (5) into plate assemblies (8) and (9). Be sure that the holes in the pins and the holes in the plate assemblies are aligned horizontally. Insert pins (32) into carriage assembly (33). Be sure that the holes in the pins and the holes in the carriage assembly are aligned vertically.
Use fittings (21), pins (10), bolts (15), and locknuts (6) in order to install link assemblies (26) to bracket assemblies (11) and (12). Tighten the bolts (15) to a torque of 105 20 N m (77 15 ft). Use pins (23), bolts (24), and nuts (19) in order to install the other end of link assemblies (26) to carriage assembly (33) .Note: Insert pins (10) into bracket assemblies (11) and (12). Be sure that the holes in the pins and the holes in the bracket assemblies are aligned horizontally. Insert pins (23) into carriage assembly (33). Be sure that the holes in the pins and the holes in the carriage assembly are aligned vertically.
Put stands or blocks under carriage assembly (33) in order to hold the carriage in a level position during assembly.
Use bearings (20), fittings (21), bolts (18), nuts (19), and washers (34) in order to install the head end of cylinder (36) to carriage assembly (33). Tighten bolts (18) to a torque of 120 20 N m (90 15 lb ft).
Illustration 3 g01296627
Remove flanges (37), bolts (38), washers (39), covers (40) and seals (41) from cylinder assembly (36) .Note: Covers (40) and seals (41) are for shipping and storage.
Illustration 4 g01296629
Illustration 5 g01296632
Remove two plugs and two seals from tubes


Parts breather Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.