BREATHER GP 3060313 - Caterpillar

TARGET="_parent">Radiator Pressure Cap - Clean/Replace
Ripper Tip and Shank Protector - Inspect/Replace
Transmission Magnetic Screen - Clean
Window Washer Reservoir - Fill
Window Wipers - Inspect/Replace
Windows - Clean
Every 10 Service Hours or Daily
Backup Alarm - Test
Brakes, Indicators and Gauges - Test
Cab Filter (Fresh Air) - Clean/Inspect/Replace
Cooling System Level - Check
Engine Oil Level - Check
Fuel System Primary Filter/Water Separator - Drain
Fuel Tank Water and Sediment - Drain
Hydraulic System Oil Level - Check
Seat Belt - Inspect
Transmission Oil Level - Check
Every 50 Service Hours or Weekly
Bulldozer Power Angling Tilt Hinge Pins - Lubricate
Cab Filter (Recirculation) - Clean/Inspect/Replace
Equalizer Bar Center Pin - Lubricate
Ripper Linkage and Cylinder Bearings - Lubricate
Initial 250 Service Hours
Engine Oil and Filter - Change
Engine Valve Lash - Check
Transmission Oil Filter - Replace
Transmission Oil Filter - Replace
Every 250 Service Hours
Engine Oil Sample - Obtain
Every 250 Service Hours or Monthly
Belt - Inspect/Replace
Equalizer Bar Pins - Lubricate
Final Drive Oil Level - Check
Pivot Shaft Oil Level - Check
Track - Check/Adjust
Initial 500 Service Hours
Transmission Oil Filter - Replace
Transmission Oil Filter - Replace
Initial 500 Hours (for New Systems, Refilled Systems, and Converted Systems)
Cooling System Coolant Sample (Level 2) - Obtain
Every 500 Service Hours
Cooling System Coolant Sample (Level 1) - Obtain
Final Drive Oil Sample - Obtain
Hydraulic System Oil Sample - Obtain
Transmission System Oil Sample - Obtain
Every 500 Service Hours or 3 Months
Engine Crankcase Breather - Clean
Engine Oil and Filter - Change
Fuel System Primary Filter - Clean/Replace
Fuel System Secondary Filter - Replace
Fuel Tank Cap Filter and Strainer - Replace/Clean
Hydraulic System Oil Filter - Replace
Steering Charge Filter - Replace
Transmission Oil Filter - Replace
Transmission Oil Filter - Replace
Every 1000 Service Hours or 6 Months
Battery - Inspect
Rollover Protective Structure (ROPS) - Inspect
Transmission Oil - Change
Every 2000 Service Hours
Engine Valve Lash - Check
Every 2000 Service Hours or 1 Year
Final Drive Oil - Change
Hydraulic System Oil - Change
Track Roller Frame - Inspect
Track Roller Frame Guides - Inspect
Every Year
Cooling System Coolant Sample (Level 2) - Obtain
Every 3000 Service Hours or 2 Years
Cooling System Water Temperature Regulator - Clean/Replace
Every 3 Years After Date of Installation or Every 5 Years After Date of Manufacture
Seat Belt - Replace
Every 6000 Service Hours or 3 Years
Cooling System Coolant Extender (ELC) - Add
Every 12 000 Service Hours or 6 Years
Cooling System Extended Life Coolant - Change