BREATHER GP 3417150 - Caterpillar

Illustration 1 g00869694
Wipe all fittings before you apply lubricant.
Illustration 2 g00359772
Typical example
Apply lubricant through the fitting at the base of each boom cylinder.
Illustration 3 g00565405
The fittings are at the base of the boom. The fittings can be serviced from the platform on the storage box. To lubricate the lower right boom bearing, apply lubricant through fitting (1). To lubricate the lower left boom bearing, apply lubricant through fitting (2). To lubricate the boom cylinder rod, apply lubricant through fittings (3) and (5). To lubricate the stick cylinder head, apply lubricant through fitting (4) .Note: To ensure proper lubrication of the lower boom bearings and of the boom cylinder rod end bearings, lubricant should be applied through fittings (1), (2), (3), and (5). Apply lubricant first when the boom is raised and any implement is suspended. Then apply lubricant when the boom is lowered and the implement is rested on the ground with a slight downward pressure.
Illustration 4 g00869696
Apply lubricant through the fittings. These fittings are on the link and on the bucket.
Illustration 5 g00869805
These fittings are located on the end of the stick.
Apply lubricant through fitting (6) and fitting (9) in order to lubricate the connection point of the boom and of the stick.
Apply lubricant through fitting (7) in order to lubricate the stick cylinder rod.
Apply lubricant through fitting (8) in order to lubricate the bucket cylinder head end.Note: If the machine is equipped with an automatic lubrication system, lubrication of the boom, stick and bucket control linkage does not need to be done manually.