BREATHER AS 3632519 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-3931 Anti-Seize Compound -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01096276
Position the gasket on the exhaust manifold.
Attach a suitable lifting device to turbocharger (1). The weight of turbocharger (1) is approximately 23 kg (51 lb). Install turbocharger (1) on the exhaust manifold. Note: Discard the locknuts after use. Use new locknuts for installation.
Apply Tooling (A) to the threads of the bolts and install locknuts (4) finger tight.
Position the integral seal on turbocharger (1) and connect oil drain tube assembly (3).
Position the gasket on turbocharger (1) and connect oil supply tube assembly (2) to turbocharger (1).
Tighten the nut on the V-band clamp to a torque of 14 1 N m (124 9 lb in). Lightly tap around the diameter of the V-band clamp with a soft hammer. Tighten the nut to a torque of 14 1 N m (124 9 lb in).
Tighten locknuts (4) to a torque of 55 5 N m (41 4 lb ft).