BRIDGE 2308094 - Caterpillar

Introduction
The 8T1000 Electronic Position Indicator Group is a digital readout precision linear measuring gage capable of displaying either inch or millimeter displacement. It replaces mechanical dial indicators and allows readings to be taken in applications where mechanical dial indicators would fail, such as rapidly changing dynamic readings.The indicator and probe are designed with special filtering for stabilizing dynamic readings. Static measurements can also be taken. The dynamic reading feature allows the fuel injection pump rack position to be monitored on an operating engine so the fuel setting can be monitored while the engine is under load.The position indicator can also be used on the Fuel Injection Equipment Test Stand as a permanent installation for testing and calibrating fuel injection pumps. A "floating zero" is provided to allow the display to be set to zero anywhere in the measurement range of the probe by pressing a touch switch.Reference: Caterpillar Service Technology Group Tool Guide.Components Of The 8T1000 Electronic Position Indicator Group
(1) 6V3072 Carrying Case. (2) SEES5690 Decal (8T1000 Group). (3) 8T5295 Foam Insert. (4) 6V6045 Accessories Case. (5) SEES5575 Decal (ACCESSORIES). (6) 8T1001 Electronic Position Indicator. (7) 6V2198 5486.4 mm (18') Extension Cable (also used in 6V3121 Multitach Group). (8) 8T1002 25.4 mm (1.00") Probe. (9) SEES5691 Decal on Rear of 8T1001 Indicator (not shown). (10) SEHS8623 Instruction for use of the 8T1000 Electronic Position Indicator (not shown).Optional Items
(11) 5P7366 Power Cable. (12) 8T5268 Power Supply. (13) 8T5111 Adapter Cable. (14) 1P7446 Rack Contact Cable. (15) 8T5297 Probe Cable.
(16) 6V6042 Probe Contact Point Group.(11) 5P7366 Power Cable for connection to 11 to 40 Volts DC (machine battery).(12) 8T5268 110/220 Volts AC, 50/60 Hz power supply for diagnostic service tools. Supplies 11 to 20 Volts DC at .30 Amp. max current.(13) 8T5111 Adapter Cable to allow 1P7446 Rack Contact Cable to be used with the "CONTACT" connector on the position indicator.(14) 1P7446 Rack Contact Cable. Connects to the rack contact screw on Caterpillar® engines. 8T5111 Cable is also required for use with position indicator.(15) 8T5297 914.4 mm (36") Probe Cable.(16) 6V6042 Probe Contact Point Group - Contains straight contact points from 2.18 mm (0.09") long to 120.5 mm (4.74") long. It also has three flat points and a 12.7 mm (0.50") extension. Fits all dial indicators (including the position indicator probe) which have 4-48 threads.In addition to the 6V6042 Probe Contact Point Group, see the Caterpillar Tool Guide for additional tips.Features
Digital Readout: A 4 1/2 digit custom LCD (Liquid crystal display) provides a digital display of the measurement value, and has arrows to indicate which functions are being used.Provisions have been made for adding back lighting for use in dark locations, and a display heater for use in cold climates. Touch Switch: A front panel touch switch controls the functions of the indicator. It has tactile feel to allow the operator to know when a switch has been pressed hard enough to enter a function. Remote Readout: A position probe which has the same mounting stem as mechanical dial indicators