5076495 BRIDGE AS Caterpillar parts
Rating:
Alternative (cross code) number:
CA5076495
507-6495
5076495
CA5076495
507-6495
5076495
Weight: 0.45 pounds 0 kg.
Caterpillar parts catalog:
Information:
Assembly Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.Note: Check the gaskets for damage. Replace the components, if necessary.
Illustration 1 g01375411
Install gaskets (3) and (1) to engine oil cooler core (2). Position engine oil cooler core (2) to engine oil cooler cover (4).
Install the washers and nuts (6). Install the washers and nuts (5).
Install gasket (7) and position cover (8). Install the washers and bolts (9). End By:
Install the engine oil cooler. Refer to Disassembly and Assembly, "Engine Oil Cooler - Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.Note: Check the gaskets for damage. Replace the components, if necessary.
Illustration 1 g01375411
Install gaskets (3) and (1) to engine oil cooler core (2). Position engine oil cooler core (2) to engine oil cooler cover (4).
Install the washers and nuts (6). Install the washers and nuts (5).
Install gasket (7) and position cover (8). Install the washers and bolts (9). End By:
Install the engine oil cooler. Refer to Disassembly and Assembly, "Engine Oil Cooler - Install".
Parts bridge Caterpillar catalog:
4788539
BRIDGE AS
Caterpillar
Caterpillar
3939943
BRIDGE-VALVE
Caterpillar
Caterpillar
3791246
BRIDGE-V EXH BK
Caterpillar
Caterpillar
36204-23101
BRIDGE
Caterpillar
Caterpillar
2044047
BRIDGE
BH27
BH27
2U1503
BRIDGE
D35HP, D400
D35HP, D400
3744689
BRIDGE-INTK-YM
Caterpillar
Caterpillar
4574600
BRIDGE AS-YM
Caterpillar
Caterpillar
4505413
BRIDGE
Caterpillar
Caterpillar
36204-23101
BRIDGE
Caterpillar
Caterpillar
4560795
BRIDGE-INSERTION
Caterpillar
Caterpillar
4337074
BRIDGE-VALVE
Caterpillar
Caterpillar