1875314 BUCKET AS-GENERAL PURPOSE Caterpillar parts
980G, 980G II, 980H
Rating:
Alternative (cross code) number:
CA1875314
187-5314
1875314
CA1875314
187-5314
1875314
WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
LMWMLURX Car Honeycomb Mesh Front Bumper Racing Grills Center Grille Panel Compatible for Focus Zetec S X Ecoboost 1EB-8200-AB 1875314
LMWMLURX Compatibility: Compatible for Focus Zetec S Titanium X Ecoboost 1EB-8200-AB 1875314 || Material: Made of ABS plastic, our products are a testament to durability and practicality, designed with precision, this cutting edge material ensures easy handling without compromising strength, our products are built to withstand the harshest conditions, promising years of reliable performance. || Exterior: Improve the exterior styling of your car and give it a unique and luxurious look || Installation: Installation instructions are not included, professional installation is highly recommended || Protect Components: Protect your car's radiator, intercooler and other important engine components from external damage.
LMWMLURX Compatibility: Compatible for Focus Zetec S Titanium X Ecoboost 1EB-8200-AB 1875314 || Material: Made of ABS plastic, our products are a testament to durability and practicality, designed with precision, this cutting edge material ensures easy handling without compromising strength, our products are built to withstand the harshest conditions, promising years of reliable performance. || Exterior: Improve the exterior styling of your car and give it a unique and luxurious look || Installation: Installation instructions are not included, professional installation is highly recommended || Protect Components: Protect your car's radiator, intercooler and other important engine components from external damage.
JDQTPOET Front Bumper Hood Grille Grill Honeycomb Mesh Compatible for Focus ZETEC S/TITANUM X/TDCI/EcoBoost/STYLE/POWERSHIFT 2015-2017
JDQTPOET Compatible for Focus ZETEC S/TITANUM X/TDCI/EcoBoost/STYLE/POWERSHIFT 2015-2017, OE Number: 1EB 8200 AB, 1875314. || Material: Made of ABS material, strong, durable and impact resistance. || Upgraded Appearance: Add a new style and look to your vehicle, highlighting the overall appearance of your vehicle. || Functionality: Provides better airflow to the radiator, better aiding the cooling process. || Features: The grille is also designed to prevent debris from entering the vehicle's engine compartment.
JDQTPOET Compatible for Focus ZETEC S/TITANUM X/TDCI/EcoBoost/STYLE/POWERSHIFT 2015-2017, OE Number: 1EB 8200 AB, 1875314. || Material: Made of ABS material, strong, durable and impact resistance. || Upgraded Appearance: Add a new style and look to your vehicle, highlighting the overall appearance of your vehicle. || Functionality: Provides better airflow to the radiator, better aiding the cooling process. || Features: The grille is also designed to prevent debris from entering the vehicle's engine compartment.
Car Front Bumper Grille Racing Grills 1EB-8200-AB 1875314 Compatible for Ford Honeycomb Mesh Upper Grille
PANQIUZ Appearance: The streamlined design of the center grille is not only beautiful and generous, but also effectively reduces wind resistance and improves the driving experience || Material: The material used for the center grille has been strictly selected, so that even after a long time of use, the center grille can still maintain its initial appearance and performance || Function: Optimized structural design of the mesh enhances the cooling efficiency of the engine and prolongs the life of the engine || Installation: Precise moldls manufacturing ensures that the mesh fits the car body, facilitating daily maintenance and replacement, and easy and quick installation || Car Front Bumper Grille Racing Grills 1EB-8200-AB 1875314 Compatible For Ford Honeycomb Mesh Upper Grille
PANQIUZ Appearance: The streamlined design of the center grille is not only beautiful and generous, but also effectively reduces wind resistance and improves the driving experience || Material: The material used for the center grille has been strictly selected, so that even after a long time of use, the center grille can still maintain its initial appearance and performance || Function: Optimized structural design of the mesh enhances the cooling efficiency of the engine and prolongs the life of the engine || Installation: Precise moldls manufacturing ensures that the mesh fits the car body, facilitating daily maintenance and replacement, and easy and quick installation || Car Front Bumper Grille Racing Grills 1EB-8200-AB 1875314 Compatible For Ford Honeycomb Mesh Upper Grille
Number on catalog scheme:
2
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-4876 Lubricant 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: For information on the reusability of the cylinder head, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8218, "Specifications for Cylinder Head Assemblies 3114, 3116, and 3126 Engines" and Guideline For Reusable Parts And Salvage Operations, SEBF8162, "Procedure to Measure and Salvage Cylinder Head Assemblies and Related Components".
Thoroughly clean the mating surfaces of the cylinder head and the cylinder block.
Illustration 1 g00611342
Typical example
Install a new cylinder head gasket (3) .Note: For information on the cylinder head gasket for 3116 engines, refer to Special Instruction, SEHS9395, "3116 Cylinder Head Gasket Usage".
Illustration 2 g01007597
Typical exampleNote: To avoid damage to the cylinder head gasket, use guide bolts of an appropriate size to install the cylinder head.
Attach a suitable lifting device to the cylinder head. Position the cylinder head assembly onto the dowels in the cylinder block. Lower the cylinder head onto the cylinder block.
Illustration 3 g00654709
Inspect the condition of cylinder head bolts (1) and (2) . For information on the reusability of the bolts, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8301, "Inspection and Reuse of Critical Fasteners Used in All Engines". Replace cylinder head bolts (1) and (2) , if necessary.
Lubricate cylinder head bolts (1) and (2) and both sides of the washers with Tooling (A) . Install cylinder head bolts (1) and (2) . Follow Step 6 for the correct tightening procedure.
Illustration 4 g00641677
3114 Cylinder head
Illustration 5 g00611358
Tighten the cylinder head bolts according to the following procedure:
Tighten bolts (1) through bolt (14) in a numerical sequence to a torque of 300 15 N m (221 11 lb ft).
Loosen bolts (1) through bolt (14) to a torque of 0 N m.
Tighten bolts (1) through bolt (14) again in a numerical sequence to a torque of 130 15 N m (96 11 lb ft).
Retighten bolts (1) through bolt (14) again in a numerical sequence to a torque of 130 15 N m (96 11 lb ft).
Turn bolts (1) through bolt (14) by numerical sequence an additional 90° (1/4 turn).
Tighten bolt (15) through bolt (20) in a numerical sequence to a torque of 55 7 N m (41 5 lb ft).End By:
Install the exhaust manifold. Refer to Disassembly and Assembly, "Exhaust Manifold - Remove and Install".
Install the inlet manifold. Refer to Disassembly and Assembly, "Inlet Manifold - Install".
Install the water temperature regulator housing. Refer to Disassembly and Assembly, "Water Temperature Regulator Housing- Remove and Install".
Install the unit injectors. Refer to Disassembly and Assembly, "Unit Injector - Install".
Install the fuel control linkage. Refer to Disassembly and Assembly, "Fuel Injection Control Linkage - Install".
Install the governor. Refer to Disassembly and Assembly, "Governor - Install".
Install the fuel filter base. Refer to Disassembly and Assembly, "Fuel Filter Base - Remove and Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-4876 Lubricant 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: For information on the reusability of the cylinder head, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8218, "Specifications for Cylinder Head Assemblies 3114, 3116, and 3126 Engines" and Guideline For Reusable Parts And Salvage Operations, SEBF8162, "Procedure to Measure and Salvage Cylinder Head Assemblies and Related Components".
Thoroughly clean the mating surfaces of the cylinder head and the cylinder block.
Illustration 1 g00611342
Typical example
Install a new cylinder head gasket (3) .Note: For information on the cylinder head gasket for 3116 engines, refer to Special Instruction, SEHS9395, "3116 Cylinder Head Gasket Usage".
Illustration 2 g01007597
Typical exampleNote: To avoid damage to the cylinder head gasket, use guide bolts of an appropriate size to install the cylinder head.
Attach a suitable lifting device to the cylinder head. Position the cylinder head assembly onto the dowels in the cylinder block. Lower the cylinder head onto the cylinder block.
Illustration 3 g00654709
Inspect the condition of cylinder head bolts (1) and (2) . For information on the reusability of the bolts, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8301, "Inspection and Reuse of Critical Fasteners Used in All Engines". Replace cylinder head bolts (1) and (2) , if necessary.
Lubricate cylinder head bolts (1) and (2) and both sides of the washers with Tooling (A) . Install cylinder head bolts (1) and (2) . Follow Step 6 for the correct tightening procedure.
Illustration 4 g00641677
3114 Cylinder head
Illustration 5 g00611358
Tighten the cylinder head bolts according to the following procedure:
Tighten bolts (1) through bolt (14) in a numerical sequence to a torque of 300 15 N m (221 11 lb ft).
Loosen bolts (1) through bolt (14) to a torque of 0 N m.
Tighten bolts (1) through bolt (14) again in a numerical sequence to a torque of 130 15 N m (96 11 lb ft).
Retighten bolts (1) through bolt (14) again in a numerical sequence to a torque of 130 15 N m (96 11 lb ft).
Turn bolts (1) through bolt (14) by numerical sequence an additional 90° (1/4 turn).
Tighten bolt (15) through bolt (20) in a numerical sequence to a torque of 55 7 N m (41 5 lb ft).End By:
Install the exhaust manifold. Refer to Disassembly and Assembly, "Exhaust Manifold - Remove and Install".
Install the inlet manifold. Refer to Disassembly and Assembly, "Inlet Manifold - Install".
Install the water temperature regulator housing. Refer to Disassembly and Assembly, "Water Temperature Regulator Housing- Remove and Install".
Install the unit injectors. Refer to Disassembly and Assembly, "Unit Injector - Install".
Install the fuel control linkage. Refer to Disassembly and Assembly, "Fuel Injection Control Linkage - Install".
Install the governor. Refer to Disassembly and Assembly, "Governor - Install".
Install the fuel filter base. Refer to Disassembly and Assembly, "Fuel Filter Base - Remove and Install".
Caterpillar SIS machinery equipment:
Caterpillar SIS
980G Wheel Loader 2KR00001-UP (MACHINE) POWERED BY 3406C Engine »
187-5314
BUCKET AS-GENERAL PURPOSE
980G Wheel Loader 9CM00001-UP (MACHINE) POWERED BY 3406C Engine »
187-5314
BUCKET AS-GENERAL PURPOSE
980G II Wheel Loader AWH00001-UP (MACHINE) POWERED BY 3406 Engine »
187-5314
BUCKET AS-GENERAL PURPOSE
980G II Wheel Loader AXG00001-UP (MACHINE) POWERED BY 3406E Engine »
187-5314
BUCKET AS-GENERAL PURPOSE
980H Wheel Loader JMS00001-UP (MACHINE) POWERED BY C15 Engine »
187-5314
BUCKET AS-GENERAL PURPOSE
980H Wheel Loader MHG00001-UP (MACHINE) POWERED BY C-15 Engine »
187-5314
BUCKET AS-GENERAL PURPOSE
Caterpillar parts catalog:
Parts bucket Caterpillar catalog:
3546106
BUCKET GP-HEAVY DUTY
980H, 980K
980H, 980K
3936003
BUCKET GP-MATERIAL HANDLING
980H, 980K
980H, 980K
3065912
BUCKET GP-SLAG
980H, 980K
980H, 980K
3596140
BUCKET AS
980H
980H
3975829
BUCKET AS-ROCK
980H, 980K
980H, 980K
2228166
BUCKET AS
980H
980H
2392687
BUCKET & ADJUSTER GP
320D, 320D LRR, 320E, 320E RR, 324D, 324D L, 324E
320D, 320D LRR, 320E, 320E RR, 324D, 324D L, 324E
2392578
BUCKET AS-EXCAVATION
320D, 320D LRR, 320D RR
320D, 320D LRR, 320D RR
2392581
BUCKET AS-EXCAVATION
320D, 320D LRR, 320D RR, 320E, 320E RR
320D, 320D LRR, 320D RR, 320E, 320E RR
3051631
BUCKET AS-EXCAVATION
311F LRR, 312E, 314E CR
311F LRR, 312E, 314E CR
3609930
BUCKET AR-EXTREME EXCAVATION
336D L, 336D LN
336D L, 336D LN
1130513
BUCKET AS-LIGHT MATERIAL
966F II, 970F
966F II, 970F
9R5789
BUCKET GP-MULTIPURPOSE
426B, 428, 428B, 436B, 438, 438B
426B, 428, 428B, 436B, 438, 438B
1046505
BUCKET GP-PENETRATION
966F II, 970F
966F II, 970F
1875318
BUCKET AS-ROCK
980G, 980G II
980G, 980G II