BUCKET AS-HOE 2193357 - Caterpillar

Removal Procedure
Accidental machine starting can cause injury or death to personnel working on the machine.To avoid accidental machine starting, turn the battery disconnect switch to the OFF position and remove the key. If the machine is not equipped with a battery disconnect switch, disconnect the battery cables from the battery and tape the battery clamps.Place a do not operate tag at the battery disconnect switch location to inform personnel that the machine is being worked on.
Turn the battery disconnect switch to the OFF position.
Illustration 1 g03364799
Use two people to remove ladder (1). The ladder (1) weighs approximately 30 kg (66 lb). Remove panels (2).
Illustration 2 g03364806
Disconnect harness assemblies (3).
Remove battery hold-down (6). Remove batteries (4). The batteries (4) weigh approximately 27 kg (60 lb) each.
Remove bracket (5). Installation Procedure
Install batteries (4) in the reverse order of removal.
Tighten the nuts for harness assemblies (3) to a torque of 7.2 1.6 N m (64 14 lb in).