BUCKET GP-MP 2211696 - Caterpillar

Illustration 3 g03643653
(3) 214-9186 Button
(4) 365-9646 Frame As
Assemble 16 Buttons (3) to Frame As (4). Refer to Illustration 3 for location of Buttons.
Illustration 4 g03643677
(7) 384-9167 Glass
(16) 3E-9413 Seal
Ensure that all contact surfaces are clean and free of dust. Place Glass (7) on a padded surface. Assemble Seal (16) to the entire perimeter of the Glass.Note: Repeat Step 2 for Glass (6) and Glass (8)
Illustration 5 g03643693
Facing the front of the Frame As (5)
( 4) 365-9646 Frame As
(6) 384-9166 Glass
(7) 384-9167 Glass
(8) 384-9168 Glass
(16) 3E-9413 Seal
Ensure that all contact surfaces are clean and free of dust. Assemble Glass (6), (7), and (8) to Frame As (4). Ensure that Glass is seated within Seal (16) and ensure that Seal (16) seats securely to Frame As (4).
Illustration 6 g03643771
(D) Mounting Studs
(13) 3E-4352 Hard Washer
Assemble two Hard Washers (13) to the two Mounting Studs (D) at the top, front, center of the cab.
Illustration 7 g03643716
View of Frame from the inside of the operator station
(4) 365-9646 Frame As
Ensure that all contact surfaces are clean and free of dust. Apply an appropriate silicone sealer to the contact surfaces of the cab and Frame As (4).
Illustration 8 g03643778
(D) Mounting Studs
(4) 365-9646 Frame As
(11) 344-5673 Nut
(15) 9X-8256 Washer
Have several people assist in lifting Frame As (4) onto the contact surface of the cab. Ensure that the top two holes are seated on the two Mounting Studs (D) shown in Illustration 6. Secure Frame As (4) to Mounting Studs (D) using two Washers (15) and two Nuts (11).
Illustration 9 g03643849
(1) 8T-5400 Connector As
(4) 365-9646 Frame As
(10) 423-4217 Window Wiper Motor Gp
Assemble Window Wiper Motor Gp (10) from inside the cab outward and through Frame As (4). Assemble Connector As (1) to the bottom port of Window Wiper Motor Gp (10).
Apply pressure to the outside of Frame As (4) using clamping or another suitable method until silicone cures and seals.
Illustration 10 g03643858
(5) 373-2414 Window Wiper Arm Gp
(10) 423-4217 Window Wiper Motor Gp
Assemble Window Wiper Arm Gp (5) to Window Wiper Motor Gp (10).
Illustration 11 g03643866
(2) 189-8610 Wiper Blade
(5) 373-2414 Window Wiper Arm Gp
Assemble Wiper Blade (2) to Window Wiper Arm Gp (5).
Illustration 12 g03643883
(9) 389-1954 Tube As
(12) 345-7725 Screw
(14) 9D-3767 Button Plug
Assemble Tube As (9) to the cab using eight Screws (12). Place Button Plugs (14) in the open ends of Tube As (9).