2268052 BUCKET AS-EXCAVATION Caterpillar parts
312C, 312D
Rating:
Alternative (cross code) number:
CA2268052
226-8052
2268052
CA2268052
226-8052
2268052
EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Information:
Install Tooling (A) and suitable lifting straps to the counterweight.
Illustration 6 g00676604
Remove one bolt (8) and the washers from the counterweight.Note: Bolt (8) is located in the center and on the bottom of the counterweight.
Illustration 7 g00676622
Remove three bolts (9), (10) and (11) and the washers from the counterweight. Note: Remove bolt (10) first. Remove bolts (9) and (11) last. Removing the bolts in this sequence will reduce the possibility of injury.Note: Shims may be present behind bolts (9) and (11). Identify the placement of the shims prior to removal. Remove the shims.
Illustration 8 g00676633
Remove counterweight (12) from the machine with suitable lifting straps. Weight of the counterweight is 249 kg (550 lb).Installation Procedure
Table 2
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7574     Link Bracket     2    
Illustration 9 g00676583
Illustration 10 g00676633
Illustration 11 g00557318
Attach Tooling (A) and a suitable lifting strap to counterweight (12), as shown above. Install counterweight (12) with washers and bolts (11), (10) and (9) to the machine. Tighten bolts to a torque of 240 40 N m (177 30 lb ft). Weight of the counterweight is 249 kg (550 lb).Note: Install the required shims. The clearance between the frame and the counterweight is 3 mm (0.1181 inch ).
Illustration 12 g00676604
Install bolt (8) and the washer to the counterweight. Tighten bolt (8) to a torque of 240 40 N m (177 30 lb ft).
Illustration 13 g00676583
Remove Tooling (A) from the counterweight.
Illustration 14 g00676545
Install hood support latch (7). Secure hood support latch (7) to the counterweight with two bolts (6) and the washers.
Illustration 15 g00551674
Install bracket (3). Secure bracket (3) to the counterweight with two bolts (5) and washers (4) .Note: Four washers (4) are installed with each bolt (5) .
Illustration 16 g00545603
Illustration 17 g00545628
Install left rear corner protector (2) with washers and four bolts (1). Tighten the bolts.
Repeat Step 6 for the right rear corner protector.
Close the hood.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts bucket Caterpillar catalog:
2268062
BUCKET AS-EXCAVATION
312C, 312D
312C, 312D
1106737
BUCKET AS-EXCAVATION
312, 312B L, 312C
312, 312B L, 312C
2268958
BUCKET GP-EXCAVATION
312C, 312D, M313C, M313D
312C, 312D, M313C, M313D
2268963
BUCKET GP-EXCAVATION
312C, 312D, M313C, M313D
312C, 312D, M313C, M313D
2268966
BUCKET GP-EXCAVATION
312C, 312D, M313C, M313D
312C, 312D, M313C, M313D
2268970
BUCKET GP-EXTREME EXCAVATION
312C, 312D, M313C, M313D
312C, 312D, M313C, M313D
2384599
BUCKET AS-EXCAVATION
312C, 312D
312C, 312D
2393789
BUCKET AS-EXCAVATION
312C, 312D
312C, 312D
2268067
BUCKET AS-EXTREME EXCAVATION
312C, 312D
312C, 312D
2384618
BUCKET AS-EXTREME EXCAVATION
312C, 312D
312C, 312D
2397149
BUCKET AS-EXCAVATION
312C, 312D
312C, 312D
2397150
BUCKET AS-EXCAVATION
312C, 312D
312C, 312D
2268050
BUCKET AS-EXCAVATION
312C, 312D
312C, 312D
2268049
BUCKET AS-EXCAVATION
312C, 312D
312C, 312D
2384617
BUCKET & ADJUSTER GP
312C, 312D
312C, 312D
2384614
BUCKET & ADJUSTER GP
312C, 312D
312C, 312D
2384611
BUCKET & ADJUSTER GP
312C, 312D
312C, 312D
2384608
BUCKET & ADJUSTER GP
312C, 312D
312C, 312D
2268061
BUCKET AS-EXCAVATION
312C, 312D
312C, 312D
2268059
BUCKET AS-EXCAVATION
312C, 312D
312C, 312D
2268058
BUCKET AS-EXCAVATION
312C, 312D
312C, 312D
2268056
BUCKET AS-EXCAVATION
312C, 312D
312C, 312D
2268055
BUCKET AS-EXCAVATION
312C, 312D
312C, 312D
2268053
BUCKET AS-EXCAVATION
312C, 312D
312C, 312D