BUCKET & ADJUSTER GP 2297938 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tooling    Part Number    Part Description    Qty    
A     138-7575     Link Bracket     2    
B     1U-9200     Lever Puller Hoist     1    
Illustration 1 g01137960
Attach Tooling (A) to torque converter (9). Attach Tooling (B) and a suitable lifting device to torque converter (9). The weight of torque converter (9) is approximately 726 kg (1600 lb).
Install torque converter (9) and install bolts (20) .
Illustration 2 g01137928
Connect tee fitting (19) to torque converter (9) .
Illustration 3 g01137925
Install bracket (17) to the torque converter. Connect clamp (18) to bracket (17).
Illustration 4 g01137921
Connect hose assemblies (13), (14), (15) and (16) .
Illustration 5 g01137902
Move accumulator (12) into position. Install clamp (11) that holds accumulator (12) for the air conditioning system.
Illustration 6 g01137899
Connect harness assembly (10) and install the mounting hardware.
Illustration 7 g01137873
Connect hose assemblies (7) to torque converter (9). Install clip (8).
Illustration 8 g01137683
Remove clamp (5) and disconnect hose assembly (6) .
Illustration 9 g01137679
Move bracket assembly (4) into position and connect bracket assembly (4) to the machine.
Illustration 10 g01137667
Attach a suitable lifting device and Tooling (A) to bracket assembly (2). The weight of bracket assembly (2) is approximately 32 kg (70 lb). Install bracket (2) and install bolts (1) . Connect all hose assemblies (3) that are attached to bracket assembly (2) .End By:
Install the pump for the axle oil cooler. Disassembly and Assembly, "Gear Pump (Axle Oil Cooler) - Remove and Install".
Install the gear pump for the pilot oil system and the brake system. Refer to Disassembly and Assembly, "Gear Pump (Pilot, Brake) - Install".
Install the input drive shaft. Refer to Disassembly and Assembly, "Input Drive Shaft - Remove and Install".