AVSPARE.COM
parts catalog

BUCKET GP 2389510 - Caterpillar



2389510 BUCKET GP Caterpillar parts BUCKET
Rating:
41
Alternative (cross code) number:
CA2389510
238-9510
2389510
Caterpillar 2389510 BUCKET GP

Buy BUCKET GP 2389510 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 1 g01200162
Location of flow control and relief valve for rear axle oil
(1) Flow control and relief valve
(2) Inlet line
(3) Outlet line The control valve and relief valve (1) for the rear axle are located on top of the rear axle housing and connected to the oil filter. Oil is pumped from the oil pump through inlet line (2) and into the control valve. Oil is sent to the final drives and oil is sent to the differential bevel gear through outlet line (3).
Illustration 2 g01200184
Flow control and relief valve
(1) Flow control solenoid valve
(2) Filter outlet
(3) Bypass valve passage
(4) Filter inlet
(5) Inlet passage
Illustration 3 g01200194
Flow control and relief valve
(6) Outlet Passage
(7) Relief valve
(8) Cavity plug Control valve (1) and relief valve (7) make up the bypass manifold. The bypass manifold directs the flow of oil to the final drive and the differential bevel gear. Inlet passage (5) receives oil from the oil pump for the rear axle. The oil is then sent through filter inlet (4). If the relief valve pressure in the filter has been exceeded the oil will bypass the filter with bypass valve (3). The oil is then sent through the passage for filter outlet (2).Solenoid valve (1) controls the flow of the oil. Solenoid valve (1) will send the oil to the final drives and to the differential bevel gear, or solenoid valve (1) will bypass the final drives. Solenoid valve (1) will bypass the final drives in order to prevent the final drives from receiving too much oil. Solenoid valve (1) is controlled by the brake ECM. The brake ECM receives oil temperature readings from the oil temperature sensor that is located in the rear axle housing. The oil is then sent through outlet passage (6) to the final drives and differential bevel gear. If the final drive is bypassed the oil is sent to the differential bevel gear and to the rear axle housing. Cavity plug (8) is used only with an optional oil cooler.


Parts bucket Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.