BUCKET GP 2389516 - Caterpillar

Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Gp 1
Illustration 1 g01846480
Install adjusting screw (4) and nut (3). Note: Do not reuse adjusting screw (4).
Use Tooling (A) and install bushing (6) into rocker arm (2) and (8). Make sure that the oil holes in bushing (6) are aligned with the oil holes in rocker arm (2) and (8). The oil holes must be aligned in the exact position.
Install rocker arms (2) and (8) on shaft (5). Position rocker arms (2), and (8), and shaft (5) onto support assembly (7).
Illustration 2 g01846479
Ensure that rocker arm assembly (1) is correctly oriented in order to prevent damage. End By:
Install the rocker shaft. Refer to Disassembly and Assembly, "Rocker Shaft and Push Rod - Install".