AVSPARE.COM
parts catalog

BUCKET AS-ROCK 2390239 - Caterpillar



2390239 BUCKET AS-ROCK Caterpillar parts 988G BUCKET
Rating:
20
Alternative (cross code) number:
CA2390239
239-0239
2390239
Caterpillar 2390239 BUCKET AS-ROCK

Buy BUCKET AS-ROCK 2390239 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compatible equipment models: 2390239:

WHEEL LOADER  988G   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:


SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 1*******
0-2000 hrs,
0-12 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
2001-3000 hrs,
13-24 mo 50.0% 50.0% 0.0% 0.0% 50.0% 50.0%
This is a 10.0-hour job for Group 1
An additional 25 hours labor to flush and clean the oil system can be claimed if there was a major failure that sent debris through the system. The filter should be cut open and an SOS sample taken to confirm debris is present. The SOS report should be attached to the warranty claim when filing for the additional labor.
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 2*******
0-4000 hrs,
0-12 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
4001-5000 hrs,
13-24 mo 50.0% 50.0% 0.0% 0.0% 50.0% 50.0%
This is a 10.0-hour job for Group 2
An additional 25 hours labor to flush and clean the oil system can be claimed if there was a major failure that sent debris through the system. The filter should be cut open and an SOS sample taken to confirm debris is present. The SOS report should be attached to the warranty claim when filing for the additional labor.
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
Replace the failed 230-7551 Torque Converter using the following procedure for both Group 1 and Group 2.
Refer to the following service manuals as required:
TH220B and TH330B Service Manual_31200262: Power Train Disassembly and Assembly.
TH360B and TH560B Service Manual_31200264: Power Train Disassembly and Assembly.
TH580B Service Manual_31200266: Power Train Disassembly and Assembly.
TH336, TH337, TH406, TH407, TH414, TH514 and TH417 Service Manual_31200370: Transmission.
All of the above Service Manuals are available from the Cat Alliance Group (CAG) web site. A link to this web site is available from the "Additional Service Information" section on the front screen of SIS, under "CAT Branded Telehandlers".
Before carrying out the following procedure, identify the serial number of the transmission installed in the machine in question, and ensure that that transmission serial number is listed under "Affected Product" in this publication.
1. Remove the transmission and torque converter from the machine and then remove the converter from the transmission.
2. Install a new 178-8164 Oil Seal.
3. Install a new 268-1711 Torque Converter.
4. Install the transmission and torque converter into the machine.
5. Use new 107-6826 Bolts to install the front and rear drive shafts to the transmission.
6. Install a new 1G-8878 Power Train Oil Filter.
7. Test the machine for proper operation.

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts bucket Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.