BUCKET GP-ROCK 2462771 - Caterpillar

Illustration 27 g00369040
Install retaining rings (28) .
Illustration 28 g00369039
Install seal (25) and three O-ring seals (26) in cover (27) .
Illustration 29 g00369038
Put cover (24) in position on the valve body. Install four socket head bolts (23) . Tighten the four socket head bolts to a torque of 12 1 N m (9 1 lb ft) .
Illustration 30 g00369037
Install O-ring seal (22) , spring seat (19) , spring (20) and spring (21) in the valve body, as shown.
Illustration 31 g00369036
Put cover (17) in position on the valve body. Install four socket head bolts (18) . Tighten the four socket head bolts to a torque of 12 1 N m (9 1 lb ft) .
Illustration 32 g00369035
Install the seat, spring (15) and retaining ring (16) in the valve body.
Illustration 33 g00369034
Install O-ring seal (14) on case (13) . Install the piston and case (13) in the valve body.
Illustration 34 g00369033
Install spring (9) , sleeve (10) , pin (12) and five O-ring seals (11) in the valve body, as shown.
Illustration 35 g00368945
Put cover (8) in position on the valve body. Install four socket head bolts (7) . Tighten the four socket head bolts to a torque of 12 1 N m (9 1 lb ft) .
Illustration 36 g00368941
Install O-ring seal (5) and eight O-ring seals (6) in the valve body.
Illustration 37 g00370452
Put pressure and flow compensator valve (46) in position on the front body assembly. Install four socket head bolts (45) . Tighten the four socket head bolts to a torque of 29 3 N m (21 2 lb ft) .
Illustration 38 g00368939
Put pressure and flow compensator valve (4) in position on the rear body assembly. Install four socket head bolts (3) . Tighten the four socket head bolts to a torque of 29 3 N m (21 2 lb ft) .
Illustration 39 g00368938
Install the O-ring seal in the cover of the main hydraulic pump. Install pilot pump (2) and two socket head bolts (1) . Tighten the two socket head bolts to a torque of 40 8 N m (30 6 lb ft) .
To avoid system damage, make sure that the hydraulic motor is properly filled with hydraulic oil before start-up.
End By: Install the main hydraulic pump and the pump drive coupling. Refer to Disassembly and Assembly, "Main Hydraulic Pump - Install" in this manual.