BUCKET AR-GENERAL PURPOSE 2526909 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
ZZ     9U-7089     Tapered Cap/Plug     1    
9U-7090 Tapered Cap/Plug     1    
9U-7070 Tapered Cap/Plug     1    
9U-7087 Tapered Cap/Plug     4    Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01035595
Remove bolt (1). Remove bolts (2). Disconnect tube assembly (3) and remove gasket (4) .
Illustration 2 g01035597
Remove bolts (9). Disconnect elbow assembly (10) and remove gasket (8). Remove nuts (6). Remove turbocharger (5) and gasket (7) .