BUCKET AR-GENERAL PURPOSE 2849279 - Caterpillar

Sound Level Information for Machines in Eurasian Economic Union Countries
The declared dynamic operator sound pressure level is 80 dB(A) when "ISO6396:2008" is used to measure the value for the enclosed cab position with the following exceptions: this measurement was taken with the Air Conditioner and Heater turned off. The test was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained.The declared exterior sound power level LWA is 116 dB(A) when the value is measured according to the dynamic test procedures and the conditions that are specified in "ISO6395:2008". The measurement was conducted to measure the value for the enclosed cab position with the following exceptions: this measurement was taken with the Air Conditioner and Heater turned of. The test was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained.The declared sound levels listed above include both measurement uncertainty and uncertainty due to production variation.Vibration Data for Track-Type Tractors
Information Concerning Hand/Arm Vibration Level
When the machine is operated according to the intended use, the hand/arm vibration of this machine is below 2.5 meter per second squared.Information Concerning Whole Body Vibration Level
This section provides vibration data and a method for estimating the vibration level for track-type tractors.Note: Vibration levels are influenced by many different parameters. Many items are listed below.
Operator training, behavior, mode, and stress
Job site organization, preparation, environment, weather, and material
Machine type, quality of the seat, quality of the suspension system, attachments, and condition of the equipmentIt is not possible to get precise vibration levels for this machine. The expected vibration levels can be estimated with the information in Table 1 to calculate the daily vibration exposure. A simple evaluation of the machine application can be used.Estimate the vibration levels for the three vibration directions. For typical operating conditions, use the average vibration levels as the estimated level. With an experienced operator and smooth terrain, subtract the Scenario Factors from the average vibration level to obtain the estimated vibration level. For aggressive operations and severe terrain, add the Scenario Factors to the average vibration level to obtain the estimated vibration level.Note: All vibration levels are in meter per second squared.
Table 1
"ISO Reference Table A - Equivalent vibration levels of whole body vibration emission for earthmoving equipment."
Machine Type Typical Operating Activity Vibration Levels Scenario Factors
X axis Y axis Z axis X axis Y axis Z axis
Track-Type Tractors dozing 0,74 0,58 0,70 0,31 0,25 0,31
ripping 1,25 1,19 1,02 0,40 0,41 0,28
transfer 0,87 0,80 0,97 0,43 0,40 0,34 Note: Refer to "ISO/TR 25398 Mechanical Vibration - Guideline for the assessment of exposure to whole body vibration of ride on operated earthmoving machines" for more information about vibration. This publication uses data that is measured by international institutes, organizations, and manufacturers. This document provides information about the whole body exposure of operators of earthmoving equipment. Refer to Operation and Maintenance Manual, SEBU8257, "The European Union Physical Agents (Vibration) Directive 2002/44/EC" for more information about machine vibration levels.The Caterpillar