BUCKET GP-GENERAL PURPOSE 3635194 - Caterpillar

Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Turn the battery disconnect switch to the OFF position.
Illustration 1 g01326564
Typical example
Disconnect electrical connection (3) from the harness assembly (not shown). Mark all connections for installation.
Remove fuel shutoff solenoid (1) from the fuel injection pump housing by rotating the fuel shutoff solenoid in a counterclockwise direction.
Remove sealing washer (2) from fuel shutoff solenoid (1). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01326564
Typical example
Install sealing washer (2) to fuel shutoff solenoid (1).
Install fuel shutoff solenoid (1) into the fuel injection pump housing by rotating the fuel shutoff solenoid in a clockwise direction. Tighten the fuel shutoff solenoid to a torque of 17 N m (12 lb ft).
Connect electrical connection (3) to the harness assembly (not shown).
Turn the battery disconnect switch to the ON position.