BUCKET AS-MATERIAL HANDLING 3691828 - Caterpillar

Illustration 1 g01300880
Typical example of the old clamp (1) 208-9063 Clamp As
Illustration 2 g01300881
Typical example of the installation of clamp (1)
Illustration 3 g01300883
Typical example of the new clamp (2) 293-4388 Clamp As
Illustration 4 g01300885
Typical example of the installation of clamp (2) A new clamp is now used on the above 3500 Engines. The new clamp is used in the air cleaner groups that are listed in Table 2.
Illustration 5 g01301913
(3) Nut (4) T-bolt (5) Receiver (6) Locking mechanismThe new clamp is more rugged. Installation of the new clamp is also easier. The design of the old clamp has been replaced with the new hand operated latch that is preset in order to provide the correct force. Nut (3) should not need to be adjusted. Overtightening the nut could result in the failure of the clamp. Make sure that T-bolt (4) is fully seated in receiver (5) when the clamp is installed. Also verify that mechanical locking mechanism (6) is engaged when the handle is moved to the closed position.
Table 1
Part Numbers for the Clamp Assemblies    
Old Part Number     New Part Number    
208-9063     293-4388    
Table 2
Air Cleaner Group    
281-0694    
276-5929    
251-5884    
249-2865    
226-2777    
226-2776    
226-2774    
226-2773    
213-4873    
213-4872    
208-9067    
206-0884    
Table 3
Effective Serial Numbers    
S/N:1HZ03282    
S/N:EBG00122    
S/N:GAR00202    
S/N:GLF00103    
S/N:GZS00753    
S/N:MKH00218    
S/N:PAG00151    
S/N:PBR00219    
S/N:R1A00152    
S/N:R2A00121    
S/N:SBJ00200    
S/N:SBK00168    
S/N:TTD00201    
S/N:TTF00200    
S/N:ZAP00322    
S/N:ZAR00163    
S/N:ZBB00243