BUCKET AS-GENERAL PURPOSE 3691829 - Caterpillar

Assembly Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     155-0695     Thread Lock Compound     -    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01063845
Install the O-ring seals on fuel bypass valve (2) . Install the fuel bypass valve in fuel filter base assembly (1) .
Install the O-ring seals on fuel check valve (5) . Install the fuel check valve in fuel filter base assembly (1) . Tighten the fuel check valve to a torque of 28 3 N m (21 2 lb ft).
Install the O-ring seals on fitting (3) . Install the fitting in fuel filter base assembly (1) .
If necessary, install hollow stud (4) to fuel filter base assembly (1) . Tighten the hollow stud to a torque of 70 15 N m (52 11 lb ft).Note: Apply Tooling (A) to the first 7.6 0.8 mm (0.30 0.03 inch) of threads at the base end of the taperlock stud.End By: Install the fuel filter base. Refer to Disassembly and Assembly, "Fuel Filter Base - Install".