BUCKET AS-ROCK 4180080 - Caterpillar

4180080 BUCKET AS-ROCK Caterpillar parts 988H

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA4180080
418-0080
4180080

Buy BUCKET AS-ROCK 4180080 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compatible equipment models: 4180080:

WHEEL LOADER 988H Caterpillar

Number on catalog scheme:

Caterpillar 4180080 Parts scheme BUCKET AS-ROCK

For full view, you need register

Information:

Illustration 1 g03176900
Table 1
Specification for 266-5365 Engine Oil Pump Gp
Item Qty Part Specification Description
Before you install the pump, lubricate the moving parts with clean engine oil. Rotate the pump by hand in order to ensure that the pump rotates freely.
1 1 266-5368 Oil Pump Drive Shaft As Diameter is 50.795 0.005 mm (1.9998 0.0002 inch).
Distance (A) from end of the shaft to gear face is 47.9 0.5 mm (1.89 0.02 inch).
2 1 266-5370 Oil Pump Shaft Assembly Diameter is 50.795 0.005 mm (1.9998 0.0002 inch).
Distance (B) from end of the shaft to gear face is 41.5 0.5 mm (1.63 0.02 inch).
3 2 266-5372 Gear Length of the new gear is 137.160 0.013 mm (5.4000 0.0005 inch).
Depth of the bore in the oil pump body for new gear is 137.30 0.02 mm (5.406 0.001 inch).
Before installation, bore in the gear for shaft assemblies is 50.732 0.008 mm (1.9973 0.0003 inch).
Illustration 2 g03176901
255-4842 Oil Pump Cover
Table 2
Specification for 266-5365 Engine Oil Pump Gp
Item Qty Part Specification Description
C - - Position for the bushing joint from the centerline through the bushing bores of the oil pump cover is 30 15 degrees.
4 1 262-0562 Bushing After installation, bore in the bushing for oil pump drive shaft assembly is 50.918 0.040 mm (2.0046 0.0016 inch).
Installation depth (E) is 1.5 0.5 mm (0.06 0.02 inch).
5 1 255-4854 Bushing After installation, bore in the bushing for oil pump shaft assembly is 50.918 0.040 mm (2.0046 0.0016 inch).
Installation depth (E) is 1.5 0.5 mm (0.06 0.02 inch).
6 2 7N-5683 Dowel Protrusion (F) is 8.0 0.5 mm (0.31 0.02 inch).
Illustration 3 g03176909
266-5366 Oil Pump Body As
Table 3
Specification for 266-5365 Engine Oil Pump Gp
Item Qty Part Specification Description
G - - Position for the bushing joint from the centerline through the bushing bores of the oil pump body assembly is 30 15 degrees.
7 1 255-4854 Bushing After installation, bore in the bushing for oil pump shaft assembly is 50.918 0.040 mm (2.0046 0.0016 inch).
Installation depth (J) is 1.50 0.25 mm (0.059 0.010 inch).
8 1 262-0562 Bushing After installation, bore in the bushing for oil pump drive shaft assembly is 50.918 0.040 mm (2.0046 0.0016 inch).
Installation depth (J) is 1.50 0.25 mm (0.059 0.010 inch).