BUCKET GP-MATERIAL HANDLING 4191626 - Caterpillar

4191626 BUCKET GP-MATERIAL HANDLING Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA4191626
419-1626
4191626

Caterpillar 4191626 BUCKET GP-MATERIAL HANDLING

Buy BUCKET GP-MATERIAL HANDLING 4191626 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme:

Caterpillar 4191626 Parts scheme BUCKET GP-MATERIAL HANDLING

For full view, you need register

Information:

Illustration 1 g01352576
(1) Installed piston cooling jets The valve must move freely. Tighten the bolt to the following torque. ... 9 N m (7 lb ft)Piston Cooling Jet Alignment
Illustration 2 g01352578
(2) Piston cooling jet
(3) Rod
(4) Cylinder block Use the following procedure in order to check the alignment of the piston cooling jet.
Insert rod (3) into the end of the piston cooling jet (2). Rod (3) has a diameter of 1.70 mm (0.067 inch). Rod (3) must protrude out of the top of the cylinder block.
Dimension (A) is 50.75 mm (1.9980 inch) and dimension (B) is 9.35 mm (0.3681 inch). Dimension (A) and dimension (B) are tangential to the cylinder bore (4).
The position of the rod (3) must be within dimension (C). Dimension (C) is 14 mm (0.5512 inch). Note: Ensure that the rod (3) can not damage the piston cooling jet when the alignment is checked. The piston cooling jets can not be adjusted. If a piston cooling jet is not in alignment the piston cooling jet must be replaced.