BUCKET GP-HOE 4649909 - Caterpillar

Illustration 1 g01364387
Attach Tooling (A) and a suitable lifting device to cab assembly (27) .
Install cab assembly (27). The weight of cab assembly (27) is approximately 998 kg (2200 lb).
Illustration 2 g01364383
Illustration 3 g01364381
Install bolts (26). Install mat (25) .
Illustration 4 g01364374
Install bolts (22). Connect hose assemblies (24). Connect harness assembly (23) .
Illustration 5 g01364368
Install plate (21). Install bolts (20) .
Illustration 6 g01364363
Install floor mat (19). Install support assemblies (18) .
Illustration 7 g01364357
Reposition harness assembly (16) and connect clamp (15). Install bolt (17) .
Illustration 8 g01364348
Connect ground strap (14) .
Illustration 9 g01364320
Connect harness assemblies (12). Install new cable straps (13) .
Illustration 10 g01364313
Connect harness assemblies (10). Install new cable straps (11) .
Illustration 11 g01364302
Reposition hose (9) and install a new cable strap (8) .
Illustration 12 g01364297
Position right side enclosure (6) and install bolts (7) .
Illustration 13 g01364294
Reposition hose (5) and install new cable strap (4) .
Illustration 14 g01364279
Connect hoses (3) .
Illustration 15 g01364272
Position left side enclosure (1) and install bolts (2) .
Fill the cooling system. Refer to Operation and Maintenance Manual, "Capacities (Refill)" for the capacity of the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Extended Life Coolant - Change" for the proper filling procedure.End By: Install the sweeps. Refer to Disassembly and Assembly, "Sweeps - Remove and Install".