BUCKET AR-MULTIPURPOSE 5646423 - Caterpillar

Attach Tooling (A) and a suitable lifting device to hydraulic tank (29). The weight of hydraulic tank (29) is approximately 272 kg (600 lb). Position mounts (31) and install bolts (30) on to hydraulic tank (29).
Illustration 2 g03440260
Install plate (28). Repeat for opposite side.
Illustration 3 g03439399
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install plug (27). Tighten plug (27) to a torque of 68 7 N m (50 5 lb ft).
Install seal (26), valve (25), spring (24), and guide (23).
Illustration 4 g03439392
Install drain (22) and nuts (21) and the washers.
Illustration 5 g03439381
Install tube assembly (20).
Illustration 6 g03439367
Install screen (17), plate (18), and nut (19). Tighten nut (19) to a torque of 20 1 N m (177 9 lb in).
Illustration 7 g03439358
Install tube assembly (16).
Illustration 8 g03439342
Install screen (15), plate (14), and nut (13). Tighten nut (13) to a torque of 20 4 N m (177 35 lb in).
Illustration 9 g03439338
Install screens (12) and bolts (11).
Illustration 10 g03439318
Install cover (10) and bolts (9).
Illustration 11 g03439179
Install receiver (8) and adapter (7).
Illustration 12 g03439156
Install sensor (6) and gage (5). Tighten the bolts for gage (7) to a torque of 10 1 N m (89 9 lb in). Tighten sensor (6) to a torque of 20 3 N m (177 27 lb in).
Illustration 13 g03439102
Install strainer assembly (4) and retaining ring (3).
Illustration 14 g03439096
Install cap assembly (2).
Illustration 15 g03439081
Install breather assembly (1).End By:
Install the hydraulic tank.