3092159 BULKHEAD Caterpillar parts
R1300, R1300G, R1300G II
Rating:
Alternative (cross code) number:
CA3092159
309-2159
3092159
CA3092159
309-2159
3092159
Weight: 3 pounds 1 kg.
LOAD HAUL DUMP,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Hacus - Forklift FPE352495 Hose - Radiator Hacus Aftermarket - New
Hacus HIGH-QUALITY CONSTRUCTION: Made with premium materials; built to withstand the demands of industrial environments; offering excellent resistance to wear; corrosion; and mechanical stress. || VERSATILE COMPATIBILITY: Engineered to fit a wide range of forklift models; making it a versatile choice for various equipment configurations. || SAFETY FIRST - FPE products are ready for use with all certifications. || LEADING THE INDUSTRY - FPE is a leader in forklift products and accessories. We take pride in making the highest quality, premium, reliable forklifts on the market. || All products tested for durability, reliability, and performance.
Hacus HIGH-QUALITY CONSTRUCTION: Made with premium materials; built to withstand the demands of industrial environments; offering excellent resistance to wear; corrosion; and mechanical stress. || VERSATILE COMPATIBILITY: Engineered to fit a wide range of forklift models; making it a versatile choice for various equipment configurations. || SAFETY FIRST - FPE products are ready for use with all certifications. || LEADING THE INDUSTRY - FPE is a leader in forklift products and accessories. We take pride in making the highest quality, premium, reliable forklifts on the market. || All products tested for durability, reliability, and performance.
$16.77
28 Apr 2021
US: EFI Equipment a
HOSE - RADIATOR FOR HYSTER: 3092159
Parts Express HYSTER || All Brand new & rebuilt items comes with 1 year warranty. || HOSE - RADIATOR. Category: HYSTER FORKLIFT PARTS. This part can also be found under the following part numbers: HY3092159 3092159 Â HYSTER 3092159 Â HYSTER3092159 3092159 Â Â . All Brand new & rebuilt items comes with 1 year warranty.
Parts Express HYSTER || All Brand new & rebuilt items comes with 1 year warranty. || HOSE - RADIATOR. Category: HYSTER FORKLIFT PARTS. This part can also be found under the following part numbers: HY3092159 3092159 Â HYSTER 3092159 Â HYSTER3092159 3092159 Â Â . All Brand new & rebuilt items comes with 1 year warranty.
Number on catalog scheme:
13
For full view, you need register
Information:
Machine ECM
The following is a list of Diagnostic Trouble Codes (DTCs) that are associated with the alarm circuit of the machine.
Table 1
Machine ECM (MID 039)
DTC Code Description System Response
271-6 Action Alarm : Current Above Normal The alarm may sound constantly Possible causes for an FMI 6 diagnostic code are:
The alarm circuit is shorted to ground.
The alarm has failed.
The ECM has failed. A failure of the ECM is unlikely.
Illustration 1 g06126378
Fault Alarm schematic
Note: The diagram above is a simplified schematic of the alarm connections. The schematic is electrically correct. However, not all the possible harness connectors are shown. Refer to the latest revision of Electrical Schematic, UENR3604 for the complete schematic.Diagnostic Trouble Code Procedure
Note: Prior to beginning this procedure, inspect the harness connectors that are involved in this circuit. Poor connections can often be the cause of a problem in an electrical circuit. Verify that all connections in the circuit are clean, secure, and in good condition. If a problem with a connection is found, correct the problem and verify that the diagnostic code is active before performing a troubleshooting procedure.
Identify the active FMI code associated with the components.
Determine which code is present and use the list below to determine which procedure to follow.
FMI 6 diagnostic code, proceed to Table 2.
Table 2
FMI 6 Troubleshooting
Troubleshooting Test Steps Values Results
1. Check The Travel Alarm
A. Turn the key start switch and disconnect switch ON. Do NOT start the engine.
B. Check that diagnostic code is active.
C. Disconnect the alarm from machine harness.
D. Observe the status of the diagnostic code.
The FMI 6 changes to an FMI 5 when the alarm is removed. OK - The FMI 6 changes to an FMI 5 when the alarm is disconnected. The alarm has failed.
Repair: Replace the alarm.
Proceed to Test Step 3.
NOT OK - The diagnostic code does not change when the alarm is disconnected from the harness.
Proceed to Test Step 2.
2. Check The Signal Circuit For A Short To Ground
A. Turn the key start switch and disconnect switch OFF.
B. The alarm remains disconnected from the harness.
C. Disconnect all harness connections at the ECM.
D. At the ECM harness connector, measure the resistance between the alarm contact and all possible sources of ground.
All readings are greater than 5K Ω. OK - All resistance greater than 5K Ω.
Proceed to Test Step 3.
NOT OK - One or more readings less than 5 Ω. The short is between the signal contact and the circuit with the low resistance measurement.
Repair: Repair or replace the machine harness.
Note: A resistance that is greater than 5 Ω but less than 5K Ω would indicate a loose connection or a corroded connection in the circuit. A resistance measurement that is greater than 5K Ω would indicate an open in the circuit.
Proceed to Test Step 3.
3. Check If The Diagnostic Code Remains
A. Reconnect all harness connectors. Return machine to normal operating condition.
B. Turn the key start switch and the disconnect switch ON.
C. Clear all diagnostic codes.
D. Operate the machine.
E. Stop the machine and engage the safety lock lever.
F. Check
The following is a list of Diagnostic Trouble Codes (DTCs) that are associated with the alarm circuit of the machine.
Table 1
Machine ECM (MID 039)
DTC Code Description System Response
271-6 Action Alarm : Current Above Normal The alarm may sound constantly Possible causes for an FMI 6 diagnostic code are:
The alarm circuit is shorted to ground.
The alarm has failed.
The ECM has failed. A failure of the ECM is unlikely.
Illustration 1 g06126378
Fault Alarm schematic
Note: The diagram above is a simplified schematic of the alarm connections. The schematic is electrically correct. However, not all the possible harness connectors are shown. Refer to the latest revision of Electrical Schematic, UENR3604 for the complete schematic.Diagnostic Trouble Code Procedure
Note: Prior to beginning this procedure, inspect the harness connectors that are involved in this circuit. Poor connections can often be the cause of a problem in an electrical circuit. Verify that all connections in the circuit are clean, secure, and in good condition. If a problem with a connection is found, correct the problem and verify that the diagnostic code is active before performing a troubleshooting procedure.
Identify the active FMI code associated with the components.
Determine which code is present and use the list below to determine which procedure to follow.
FMI 6 diagnostic code, proceed to Table 2.
Table 2
FMI 6 Troubleshooting
Troubleshooting Test Steps Values Results
1. Check The Travel Alarm
A. Turn the key start switch and disconnect switch ON. Do NOT start the engine.
B. Check that diagnostic code is active.
C. Disconnect the alarm from machine harness.
D. Observe the status of the diagnostic code.
The FMI 6 changes to an FMI 5 when the alarm is removed. OK - The FMI 6 changes to an FMI 5 when the alarm is disconnected. The alarm has failed.
Repair: Replace the alarm.
Proceed to Test Step 3.
NOT OK - The diagnostic code does not change when the alarm is disconnected from the harness.
Proceed to Test Step 2.
2. Check The Signal Circuit For A Short To Ground
A. Turn the key start switch and disconnect switch OFF.
B. The alarm remains disconnected from the harness.
C. Disconnect all harness connections at the ECM.
D. At the ECM harness connector, measure the resistance between the alarm contact and all possible sources of ground.
All readings are greater than 5K Ω. OK - All resistance greater than 5K Ω.
Proceed to Test Step 3.
NOT OK - One or more readings less than 5 Ω. The short is between the signal contact and the circuit with the low resistance measurement.
Repair: Repair or replace the machine harness.
Note: A resistance that is greater than 5 Ω but less than 5K Ω would indicate a loose connection or a corroded connection in the circuit. A resistance measurement that is greater than 5K Ω would indicate an open in the circuit.
Proceed to Test Step 3.
3. Check If The Diagnostic Code Remains
A. Reconnect all harness connectors. Return machine to normal operating condition.
B. Turn the key start switch and the disconnect switch ON.
C. Clear all diagnostic codes.
D. Operate the machine.
E. Stop the machine and engage the safety lock lever.
F. Check
Caterpillar parts catalog:
Parts bulkhead Caterpillar catalog:
8I1975
BULKHEAD
611
611
8I1974
BULKHEAD
611
611
8I1973
BULKHEAD
611
611
8I1972
BULKHEAD
611
611
8W7198
BULKHEAD
631E, 631G, 633E, 633E II, 637E, 637G, 651E, 657E, 657G
631E, 631G, 633E, 633E II, 637E, 637G, 651E, 657E, 657G
2378325
BULKHEAD
R2900, R2900G
R2900, R2900G
2379471
BULKHEAD
R2900, R2900G
R2900, R2900G
2494540
BULKHEAD AS
R2900G, R3000H
R2900G, R3000H
3187972
BULKHEAD AS
R2900G, R3000H
R2900G, R3000H
2488906
BULKHEAD
R2900, R2900G, R3000H
R2900, R2900G, R3000H
2422143
BULKHEAD AS
R1300G, R1300G II
R1300G, R1300G II