4J1925 BULLDOZER LINES GROUP Caterpillar parts
153, 163
Rating:
Alternative (cross code) number:
CA4J1925
4J-1925
4J1925
CA4J1925
4J-1925
4J1925
Weight: 1 pounds 0 kg.
HYDRAULIC CONTROL,
Number on catalog scheme:
For full view, you need register
Information:
TYPE="LEVEL" DEPTH="1" @@@-->Removal Procedure
Start By:
Remove belt guard.
Remove oil line (Supercharger)
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact the skin.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Drain the engine oil.
Drain the coolant.
Illustration 1 g06073061
Remove bolt (1) and bolts (4). Remove tube assembly (2). Remove bolts (5) and position tube assembly (3) out of the way.
Illustration 2 g06073092
Loosen clamps (6). Remove bolts (7) and bolts (9). Remove tube assembly (8).
Illustration 3 g06073361
Loosen clamp (10) and position hose assembly (11) out of the way. Disconnect tube assembly (12).
Illustration 4 g06073400
Remove six bolts (13). Remove ten bolts (15) and remove oil pan (14).Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 5 g06073444
Install engine oil pan (14) in the reverse order of removal.
Tighten bolts (13) and bolts (15) to a torque of 30 3 N m (266 27 lb in)in the order depicted in illustration 5.
Tighten tube assembly (12) to a torque of 25 3 N m (221 27 lb in).
Tighten clamp (10) to a torque of 3.25 0.25 N m (29 2 lb in).
Tighten bolts (9) to a torque of 23 2 N m (204 18 lb in).
Tighten clamps (6) to a torque of 3.25 0.25 N m (29 2 lb in).
Tighten bolts (5) to a torque of 23 2 N m (204 18 lb in).
Tighten bolts (4) to a torque of 80 8 N m (59 6 lb ft).
Tighten bolt (1) to a torque of 23 2 N m (204 18 lb in).
Start By:
Remove belt guard.
Remove oil line (Supercharger)
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact the skin.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Drain the engine oil.
Drain the coolant.
Illustration 1 g06073061
Remove bolt (1) and bolts (4). Remove tube assembly (2). Remove bolts (5) and position tube assembly (3) out of the way.
Illustration 2 g06073092
Loosen clamps (6). Remove bolts (7) and bolts (9). Remove tube assembly (8).
Illustration 3 g06073361
Loosen clamp (10) and position hose assembly (11) out of the way. Disconnect tube assembly (12).
Illustration 4 g06073400
Remove six bolts (13). Remove ten bolts (15) and remove oil pan (14).Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 5 g06073444
Install engine oil pan (14) in the reverse order of removal.
Tighten bolts (13) and bolts (15) to a torque of 30 3 N m (266 27 lb in)in the order depicted in illustration 5.
Tighten tube assembly (12) to a torque of 25 3 N m (221 27 lb in).
Tighten clamp (10) to a torque of 3.25 0.25 N m (29 2 lb in).
Tighten bolts (9) to a torque of 23 2 N m (204 18 lb in).
Tighten clamps (6) to a torque of 3.25 0.25 N m (29 2 lb in).
Tighten bolts (5) to a torque of 23 2 N m (204 18 lb in).
Tighten bolts (4) to a torque of 80 8 N m (59 6 lb ft).
Tighten bolt (1) to a torque of 23 2 N m (204 18 lb in).
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts bulldozer Caterpillar catalog:
9J9902
BULLDOZER AR
7A, D7G
7A, D7G
2656479
BULLDOZER GP
953D
953D
7J1755
BULLDOZER AR-ANGLING
5S, D6D
5S, D6D
3378938
BULLDOZER AS-MULTIPURPOSE BKT
906H, 906H2, 907H, 907H2
906H, 906H2, 907H, 907H2
1083971
BULLDOZER AR-STRAIGHT
D6R, D6R II
D6R, D6R II