BUMPER AS 3819582 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Turn OFF the fuel supply to the engine.
Illustration 1 g00618733
Disconnect tube assemblies (1), (2), and (4). Cap the openings or plug the openings immediately.
Remove the bolts and fuel transfer pump (3) from the front housing.
Remove the O-ring seal from fuel transfer pump (3).