BUNDLE AS 1154515 - Caterpillar

Illustration 1 g06103248
Service Menu
The following list contains some of the functions of the display module:
The diagnostic codes of the ECM systems are displayed.
The number of occurrences and the clock hour of the first and last occurrence are displayed for each of the events, active codes, and logged codes.
The definition for each logged diagnostic code and each event is displayed.Diagnostics
Illustration 2 g06103283
(1) Fault Code
(2) Fault DescriptionThe "Diagnostics" menu option will show a complete list of all active events and the logged event codes and diagnostic codes.Codes and events that are contained in the system Diagnostics may be viewed at any time.Press the "OK" key while you are in the "Diagnostics" menu option to display the Diagnostic message screen.Each line that is listed contains the following information about that event or that code.Fault Code (1) - Component Identifier or Failure Mode Identifier (CID-EID)Fault Description (2) - Diagnostic code identifierCommunicating Active Faults or Events
When the diagnostic message is acknowledged, a predetermined length of time passes before the message screen will appear on the monitoring system display again. This interval is dependent upon the severity of the warning level. Consult the appropriate warning category for the proper instruction.ECM Summary
Illustration 3 g06103290The ECM Summary menu will display information for each ECM installed on the machine.This menu organizes the systems into the following five categories:
Machine
Engine
Display
Product Link
AuxiliaryThe following information will be displayed for each ECM:
ECM Serial Number
HW Part Number
SW Part Number
SW Release Date
SW DescriptionParameters
Illustration 4 g06103300The Parameters menu will display the value of several sensors. This menu may be useful for troubleshooting purpose. Scroll down to navigate through the different systems monitored.This menu organizes the systems into the following six categories:
Engine
Power train
Steering
Brake
Implement
Starting System