BUNDLE AS-TUBE 1777523 - Caterpillar

Illustration 1. Top view of 8X-0234 Oil Cooler Lines Group.
(A) Oil cooler lines to right front brakes. (B) Oil cooler lines to left front brakes.
Illustration 2.
Views B-B, C-C and D-D for 8X-0234 Oil Cooler Lines Group.(C) Oil cooler filter. (D) Line to middle rear brake oil cooler. (E) Frame. (F) Line to manifold on right side rail. (G) Line from steering oil lines group. Longer fasteners were used to allow for sufficient thread engagement for fastening as follows:
* Two 8T-4956 Bolts (1) replace two 8T-4192 Bolts used to fasten two 2V-0600 Clips (8) as shown in view C-C above.* One 8T-4194 Bolt (9) replaces one 8T-4183 Bolt used to fasten 6V-1867 Clip (7) and 6V-1868 Clip (11) also shown in view C-C.* One 8T-4183 Bolt (10) replaces one 8T-4139 Bolt used to fasten 2V-0600 Clip in view C-C. * One 085-8091 Bolt (4) replaces 8T-4185 Bolt used to fasten 6S-9150 Clip (5) and 6S-9151 Clip (6) to the Frame as shown in view B-B above. * Two 8T-4956 Bolts (1) replace two 8T-4139 Bolts used to fasten 5P-7468 Clip (2) and 5P-7469 Clip (3) to line between oil cooler filter and middle rear brake oil cooler as shown in view D-D above.
Illustration 3.
Views A-A and F-F for 8X-0234 Oil Cooler Lines Group. (H) Right side frame rail. (J) Left side frame rail.Shorter bolts were used to prevent bottoming in mating hole as follows:
* Eight 8T-4183 Bolts (10) replace eight 8T-4194 Bolts used to fasten two 8X-8240 Plate Assemblies (12) to the left and right side rails as shown in the illustration above.* One 8T-4192 Bolt (15) replaces one 8T-4183 Bolt used to fasten 5P-7470 Clip (13) and 5P-7471 Clip (14) to rear brake oil coolers as shown in view G-G (see Illustration 4).
Illustration 4.
Side view, view G-G and view H-H for 8X-0234 Oil Cooler Lines Group. (K) Front brake oil coolers. (L) Rear brake oil coolers. (M) Torque converter. (N) Lower water lines group.Longer fasteners were used to allow for sufficient thread engagement for fastening as follows:
* One 8T-4183 Bolt (10) replaces one 8T-4956 Bolt used to fasten 5P-7470 Clip (13) and 5P-7471 Clip (14) to rear brake oil coolers as shown in Illustration 4, view H-H.* Two 8T-4183 Bolts (10) replace two 8T-4956 Bolts used to fasten 2V-0600 Clip (8) to torque converter cover as shown in the side view in Illustration 4.* Eight 8T-4956 Bolts (1) replace eight 8T-4139 Bolts used to fasten 6V-8521 Clip (16) to the frame for rear brake oil cooler lines.
Illustration 5.
Side views of rear 8X-0234 Oil Cooler Lines Group.