BUNDLE A 8N1242 - Caterpillar

Illustration 9 g06021277The sensor is a part of the delecration/brake pedal housing.Parking Brake Solenoid
Illustration 10 g06021311The parking brake solenoid is on the hydrostatic pump next to the pilot solenoid.Steering and Transmission Joystick Sensors
Illustration 11 g03055157The sensors for the steering and transmission control lever are located in the base of the control lever. The entire base must be replaced in the event of a sensor failure.Acceleration and Deceleration (Thumb Switch)
Illustration 12 g03056176The thumb switch is on the steering and transmission control lever.Reference: For more information on the thumb brake switch see Operation and Maintenance Manual, M0067874, " Operator Controls".Traction Control Switch
Illustration 13 g06021420The switch is on the switch panel that is located to the right of the seat.Reference: For more information on the traction control switch see Operation and Maintenance Manual, M0067874, " Operator Controls".Horn Switch
Illustration 14 g03056358The horn switch is the black button that is on the steering and transmission control lever.Reference: For more information on the horn switch see Operation and Maintenance Manual, M0067874, " Operator Controls".Pump Solenoids
Illustration 15 g06021434The forward and the reverse solenoids for the left side are on the left pump. The forward and the reverse solenoids for the right side are on the right pump. The solenoids allow oil to flow to the left side motor and the right side motor.Pump Sensors
Illustration 16 g06021440The pump pressure sensors are on the right side of the pump. The sensors toward the top side of the pump are in the forward loop, and the sensors toward the bottom side of the pump are in the reverse loop.Motor Solenoids
Illustration 17 g06021457The motor solenoids are on the back of the motors.Track Speed Sensors
Illustration 18 g06021465The track speed sensors are on the back of the motors.Electronic Control Module
Illustration 19 g06021487The electronic control module is on the machine right side, in the rear access panel. The electronic control module controls all electronic signals from the implement system, including solenoids, sensors, and switches.Backup Alarm
The backup alarm is mounted on the rear of the machine.
Illustration 20 g06021497Backup alarm - The alarm will sound when the lever for the steering and transmission control is in the REVERSE position. The alarm is used to alert people behind the machine that the machine is backing up.