BURNER GP 3391609 - Caterpillar

3391609 BURNER GP Caterpillar parts AP-600D, AP-655D, AS4251C

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3391609
339-1609
3391609

Buy BURNER GP 3391609 Caterpillar genuine, new aftermarket tractor parts with delivery
ASPHALT PAVER, ASPHALT SCREED,

Compatible equipment models: 3391609:

ASPHALT PAVER AP-600D AP-655D

ASPHALT SCREED AS4251C Caterpillar

Number on catalog scheme:

Caterpillar 3391609 Parts scheme BURNER GP

For full view, you need register

Information:

Illustration 1 g00516363
Install three packings (13) in the grooves of the bores. The bores are located in the outer side of the brake caliper.
Illustration 2 g00516367
Install Tooling (B) in boot (12) .
Illustration 3 g00516368
Insert piston (11) through Tooling (B) and in the bore in the outer side of the brake caliper.
Use Tooling (A) in order to push the piston to the bottom of the bore in the outer side of the brake caliper.
Make sure that boot (12) is engaged in the groove of the bore in the outer side of the brake caliper.
Remove Tooling (A) and (B) from piston (11) and boot (12) .
Repeat Steps 2, 3, 4 and 5 in order to install the pistons and the boots for the remaining two bores that are in the outer side of the caliper.
Illustration 4 g00516370
Install three plugs (7) and three seals (6) to the inner side of the brake caliper.
Illustration 5 g00516373
Install bolts (4) and plate (5) to the inner side of the brake caliper.
Illustration 6 g00516374
Install three packings (10) to the bores in the inner side of the brake caliper.
Illustration 7 g00516375
Install Tooling (B) in boot (9). Install boot (9) in the groove of the bore. The bore is located in the inner side of the brake caliper.
Illustration 8 g00516398
Insert piston (8) through Tooling (B) and in the bore in the inner side of the brake caliper.
Illustration 9 g00516399
Install Tooling (C) in position in the brake caliper and against piston (8) .
Expand Tooling (C) in order to push piston (8) into the bore in the inner side of the brake caliper. Install the other two boots and pistons in the same manner. Remove Tooling (C) from the assembly.
Illustration 10 g00516401
Install Tooling (C) in position in the brake caliper and use an appropriate plate from Tooling (D) in order to push the pistons further in the bores. Add more plates in order to push the pistons to the bottom of the bores.
Remove the tooling from the assembly. Make sure that boots (9) are engaged in the grooves of the bores. The bores are located in the inner side of the brake caliper.
Illustration 11 g00516403
Install four bolts (3) and four pins (2) to brake caliper (1) .End By: Install the service brakes. Refer to Disassembly and Assembly, "Service Brakes - Install". The information is in this manual.