parts catalog

BUS GP 4416498 - Caterpillar

4416498 BUS GP Caterpillar parts BUS
Alternative (cross code) number:
Caterpillar 4416498 BUS GP

Buy BUS GP 4416498 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme:
  For full view, you need register


Which Generate This Code:The Electronic Control Module (ECM) detects the following conditions:
The transmission oil pressure is greater than the value that is programmed in the monitoring system parameter for "High Transmission Oil Pressure".
The parameter for the "Transmission Oil Pressure Sensor" is programmed to "Installed".System Response:The ECM will log the warning. The warning lamp will come on and the warning will be transmitted to the display.
There may be a problem with the transmission oil pressure sensor.Test Step 1. Inspect the Circuit Components and the Wiring
Inspect the wiring and the connector for the transmission oil pressure sensor for damage or loose connections.
Remove the transmission oil pressure sensor and inspect the sensor for damage.Expected Result:The transmission oil pressure sensor is not damaged and the wiring is OK.Results:
OK - The sensor is operating properly and the wiring is OK.Repair: Refer to the information that is provided by the OEM for the transmission. Stop.
Not OK - Repair: Repair the components or replace the faulty components.Verify that the repair eliminates the problem. Stop.

Caterpillar SIS machinery equipment:

Caterpillar SIS

Parts bus Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.