BUSH 0833557 - Caterpillar

Accessing the Foreman Menu
The control console's parameters may be changed in order to accommodate various operating conditions which change unusually. The selected parameters are accessed by touching a sequence of keypads on the operator panel. The desired value for the configuration variable can be selected once the console's parameter has been accessed.Entering the Foreman Menu
Illustration 1 g00950554
In order to access the foreman menu, press the "SENSITIVITY" keypad. Continue to keep the"SENSITIVITY" keypad pressed and press on the "NULL SETPNT" keypad. Release the "NULL SETPNT" keypad first, and then release the "SENSITIVITY" keypad. The foreman menu has been accessed.
Illustration 2 g00950560
Once the foreman menu has been accessed, the status display will show "F". The variables of configuration that are available for selection will appear on the setting/message display.Accessing the Dealer's Menu
Note: Do not change the configurations' setting in an attempt to correct suspected problems. This will only cause the system to not operate correctly.Entering the Dealer's Menu
Note: The dealer's menu can only be entered from the foreman menu. Perform the steps below in order to access the dealer's settings.
Illustration 3 g00950569
Press the left control box's "SENSITIVITY" keypad and hold. Press and release the "NULL SETPNT" keypad. An "F" will appear on the status display. The variables of configuration that are available for selection will appear in the setting/message display.
Release the "SENSITIVITY" keypad.
Illustration 4 g00950573
Press the "SENSOR" keypad and hold. Press and release the "CONTROL MODE" keypad. A "D" will appear in the status display. The variables of configuration that are available for selection will appear in the setting/message display.
Release the "SENSOR" keypad.