BUSHING 0005842 - Caterpillar

Illustration 19 g00826993
Position left side enclosure (21) on the machine so that the mounting holes are lined up.
Install bolts (20) .
Install bolts (19) on the inside of left side enclosure (21) .
Install hose (22) and tighten the hose clamps.
Close the access door on the left side of the machine.
Illustration 20 g00824384
Connect harness assemblies (18) and secure the harness assemblies with cable straps.
Illustration 21 g00823987
Install left side step assembly (17A) with bolts (17) .
Illustration 22 g00823904
Connect control rods (16) to the main control valve with bolts (16A). Tighten the locknuts to a torque of 15 3 N m (11 2 lb ft).Note: Apply Tooling (A) to all rod ends, to pins, to locknuts, and to all exposed threads.
Illustration 23 g00823877
Connect hose assembly (15) at the refrigerant coupling assembly.Note: The refrigerant coupling assembly should prevent any leakage of refrigerant from the air conditioning system.
Illustration 24 g00823819
Push winch control lever (14) through the cab console and position the winch control lever so that the mounting holes are lined up.
Install bolts (13) .
Illustration 25 g00823803
Connect harness assemblies (12) to the underside of the winch control lever.
Illustration 26 g00823771
Position the hydraulic oil filter assembly on the mounting bracket.
Install bolts (11) .
Connect harness assembly (10) .
Illustration 27 g00823767
Position both the hydraulic oil filter assembly and the bracket and install two hidden bolts (8) .Note: The hidden bolts require a 16 mm wrench for installation.
Connect wire assembly (9) .
Illustration 28 g00826955
Illustration 29 g00823693
Position right side enclosure (5) on the machine so that the mounting holes line up.
Install bolts (3) .
Install bolts (4) on the inside of right side enclosure (5) .
Connect hoses (7) .
Connect harness assemblies (6) .
Close the access door on the right side of the machine.
Illustration 30 g00823657
Illustration 31 g00823653
Position cover (2) on the rear of the machine.
Install bolts (1) on the right side of cover (2) .
Install bolts (1) on the left side of cover (2) .