BUSHING 0968174 - Caterpillar

1. Put the cab tilt cylinder in a suitable holding fixture.2. Remove counter balance valves (7) and (8).3. Use suitable tooling to unscrew gland (2) from tube assembly (10).4. Slide rod assembly (11) with gland (2), out of tube assembly (10).5. Remove nut (16), piston half (14), seal and wear ring assembly (15), O-ring seal (13), and piston half (12) from rod assembly (11).6. Slide tube assembly (10) back on to rod assembly (11) and gland (2). Hand tighten gland (2) in tube assembly (10). Pull tube assembly (10) and gland (2), as a unit, away from rod assembly (11). Remove gland assembly (2) from tube assembly (10).7. Remove O-ring seal (9), seal (6), gland bush (5), O-ring seal (4) and lip seal (3) from gland (2).8. Remove resilient bush (1) from rod assembly (11).