BUSHING 1150591 - Caterpillar

Rimpull Limit Control
The Rimpull Limit Control page will allow the operator to set the Rimpull Limit Control setting. The Rimpull Limit Control button on the keypad enables Rimpull Limit Control. Press and hold the Rimpull Limit Control button to display the Rimpull Limit Control screen.The default setting from the factory is medium. The current selection a slider bar on the display. The operator can use the left or right arrow to highlight another selection.At key off, the last selection is remembered. At key on, Rimpull Limit Control is disabled. Press the keypad button to enable Rimpull Limit Control. The value will go to the last selected setting.Creep Control
The Creep Control (Adjustable Speed Range 1) page will allow the operator to set and adjust the Creep Control speed. Pressing the Creep Control button on the keypad enables Creep Control. Pressing and holding the Creep Control button to display the Creep Control screen.The operator can adjust the Creep Control with the left and right arrow buttons on the display. The minimum is 1 km/h (1 mph) and the maximum is 13 km/h (8.1 mph). Press the arrow to adjust. The value will display on the screen. Press and hold the arrow button to adjust the value quickly.Enable and disable the Creep Control by pressing the Creep Control button on the keypad. At key off, the Creep Control Percent is remembered at next key on.3rd Function Max Flow
Continuous Flow hydraulic oil is used on some work tools used on this machine. The flow of oil may be adjusted by using the 3rd Function Max Flow page on the secondary display screen.The 3rd Function Max Flow page will allow the operator to set and adjust the 3rd Function Hydraulic Oil Flow Percent. Press the 3rd Function Continuous Flow button on the keypad to enable the continuous oil flow. Press and hold the button to display the 3rd Function screen on the display.The default setting from the factory is 100 percent. Adjust the percent by using the left and right arrow buttons on the display. Each press of the arrow key is a 5 percent increment. The minimum is 20 percent and the maximum is 100 percent. The Percent value will display on the screen. Press and hold the arrow to adjust the value quickly. At the bottom of the screen is the estimated lpm expected at 1800 RPM when max flow is commanded. The operator does not need to press the OK button to set the value.At key off, the 3rd Function Continuous Flow Percent is remembered at next key on.Main Menu Page
The Main Menu Page provides information on the display. The initial screen on the Main Menu contains topics to select. More information may be displayed for the following topics:Settings - Navigates