1211607 BUSHING Caterpillar parts
365B, 365B II, 365C, 385C, 385C FS, 5080, 5090B
Rating:
Alternative (cross code) number:
CA1211607
121-1607
1211607
CA1211607
121-1607
1211607
Weight: 0.95 pounds 0 kg.
Information:
ID
146.283
mm
OD
151.173
mm
WIDTH
49.85
mm
EXCAVATOR, FRONT SHOVEL,
Compatible equipment models: 1211607:
Number on catalog scheme:
10
For full view, you need register
Information:
Explosion hazard! Do not use ether! This machine is equipped with an air inlet heater. Using ether can create explosions or fires that can cause personal injury or death. Read and follow the starting procedure in the Operation and Maintenance Manual.
Refer to Operation and Maintenance Manual, "Engine Starting" for further information.Improper Connections For Jump Start Cables (14)This safety message is positioned on the circuit breaker panel.
g01370909
Explosion Hazard! Improper jumper cable connections can cause an explosion resulting in serious injury or death. Batteries may be located in separate compartments. Refer to the Operation and Maintenance Manual for the correct jump starting procedure.
Refer to Operation and Maintenance Manual, "Engine Starting with Jump Start Cables" for further information.High Pressure Gas (15)This safety message is located on the accumulator.
g01374065
This system contains high pressure gas. Failure to follow the instructions and warnings could cause an explosion, resulting in possible injury or death.Do not expose to fire. Do not weld. Do not drill. Relieve pressure before discharging.See Operation and Maintenance Manual for charging and discharging. See your Caterpillar Dealer for tools and detailed information.
Refer to Operation and Maintenance Manual, "Equipment Lowering with Engine Stopped" for further information.Relieve Hydraulic Tank Pressure (16)This safety message is located on the top of the hydraulic tank.
g01371640
HYDRAULIC TANKRELIEVE TANK PRESSURE WITH ENGINE OFF BY REMOVING CAP SLOWLY TO PREVENT BURNS FROM HOT OIL.
Hot Surface (17)
Illustration 4 g01372256
This safety message is located on the engine hood.
Hot parts or hot components can cause burns or personal injury. Do not allow hot parts or components to contact your skin. Use protective clothing or protective equipment to protect your skin.
Pressurized System (18)This safety message is located next to the cooling system filler cap.
g01371640
Pressurized system! Hot coolant can cause serious burns, injury or death. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure. Read and understand the Operation and Maintenance Manual before performing any cooling system maintenance.
Refer to Operation and Maintenance Manual, "Cooling System Coolant Level - Check" for further information.High Pressure Cylinder (19)This safety message is positioned on the track adjusters.
g01076729
High Pressure Cylinder. Do not remove any parts from the cylinder until all of the pressure has been relieved. This will prevent possible personal injury or death.
See the Operation and Maintenance Manual, "Track Adjustment - Adjust" information for your product.
Caterpillar parts catalog:
Parts bushing Caterpillar catalog:
330C, 330C L, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 345B II, 345B L, 345C, 345C L, 345C MH, 3...
320B, 320N, 322B, 322B L, 322B LN, 322C, 322C FM, 325, 325 L, 325 LN, 325B, 325B L, 325C, 330, 330B, 330B L, 385B, 385C, 385C L, 390D, 390D L, 390F L, G107B, TK1051
321C, 321D LCR, 322B LN, 322C, 325C, 325C FM, 325D L, 328D LCR, 330C, 330C L, 330D L, 345B II, 345C L, 365B II, 365C, 365C L, 385B, 385C L
345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 365B, 365C, W345C MH
325D, 325D FM, 325D FM LL, 325D L, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 365B, 365C, W345C MH
324D, 330D, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E L, 336E LN, 336F L, 340D L, 340D2 L, 345B II, 345B II MH, 345B L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 34...
345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 350, 365B, 365B II, 365B L, 365C, 365C L, 374D L, 374F L, 385C, P115, VPC-30
365B, 365B II, 365B L, 365C, 385B, S365B, S365C, S465, VHS-60/3
345C, 345C L, 365C, 365C L, 365C L MH, 374D L, 374F L, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L
345B II, 345B L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 350, 365B, 365B II, 365B L, 365C, 365C L, 374D L, 374F L, 385C
365B, 365B II, 365C, 365C L, 374D L, 374F L, 385C, 390D, 390D L, 390F L
365B, 365B II, 365C, 365C L, 365C L MH, 374D L, 374F L, 385B, 385C, 385C L, 390D, 390D L, 390F L
350, 365B, 365B II, 365B L, 365C, 365C L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 5080, 5090B, M322C, M322D, M322D MH
1191868
BUSHING
5130, 5130B
5130, 5130B
1713294
BUSHING
350, 375 L, 5080, 5130, 5130B
350, 375 L, 5080, 5130, 5130B
5I4285
BUSHING
350, 375, 375 L, 5080, 5130, 5130B
350, 375, 375 L, 5080, 5130, 5130B
1142054
BUSHING
5130, 5130B
5130, 5130B
1135896
BUSHING
5130, 5130B
5130, 5130B
5I4293
BUSHING
350, 375, 5080
350, 375, 5080
1020810
BUSHING
350, 375, 375 L, 5080
350, 375, 375 L, 5080
0942666
BUSHING
330, 330 FM L, 330 L, 365B, 375, 375 L, 5080, E300, E300B, E450, E650, OEMS
330, 330 FM L, 330 L, 365B, 375, 375 L, 5080, E300, E300B, E450, E650, OEMS
0943781
BUSHING
350, 375, 375 L, 5080, E450, E650
350, 375, 375 L, 5080, E450, E650
322, 322 FM L, 322 LN, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 330, 330 FM L, 330 L, 330B, 330B L, 350, 375, 375 L, 5080, E240C, E300B, EL240B, M325B, TK1051, W330B
1211599
BUSHING
365B, 365B II, 365C, 385C, 385C FS, 5080, 5090B
365B, 365B II, 365C, 385C, 385C FS, 5080, 5090B