BUSHING 1216608 - Caterpillar

Illustration 8 g00887401
Illustration 9 g00887405
Install Tooling (C) into shaft (15). Use a prybar to remove the rotating assembly (16) from the housing.
Remove Tooling (C) from shaft (15) .
Illustration 10 g00887424
Remove shaft (15) from rotating assembly (16) .
Illustration 11 g00887426
Use Tooling (D) in order to remove retaining ring (17) from shaft (15) .
Illustration 12 g00887445
Install shaft (15) into a suitable press. Remove bearing race (18) from the shaft.
Illustration 13 g00887463
Rotate shaft (15). Install shaft (15) into a suitable press. Install Tooling (E). Remove bearing race (19) from shaft (15) .
Illustration 14 g00887501
Remove cam plate (20) from barrel assembly (21) .
Illustration 15 g00887520
Remove piston assemblies and retainer plate (22) from barrel assembly (21) .Note: Place marks on the pistons and the barrel assembly. The pistons must be returned to the original position.
Illustration 16 g00887558
Remove ball (23) and springs (24) .
Illustration 17 g00887578
Remove bearing (25) .
Remove keys (26) and locating pins (not shown) from the body of the travel motor.
Illustration 18 g00887589
Rotate the housing. Use Tooling (F) in order to remove retaining ring (27) .
Remove seal (28) .
Illustration 19 g00887619
Remove bolts (29) and cover (30) .
Illustration 20 g00887729
Remove seal (31) and backup ring (32) .
Illustration 21 g00887754
Remove piston actuator (33) and seal (34).
Illustration 22 g00887762
Remove O-ring seal (35) from the housing of the travel motor.