BUSHING 1354299 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-7536 Lift Stand 2
4C-5809 Hydraulic Pump 1
B 155-3597 Wheel Chock 4 Start By:
Connect the steering frame lock.
Follow the recommended procedure for removal and installation of tires and or wheel assemblies.Ensure that the machine and tire and or wheel assembly are properly supported at all times.Improper procedures that are used to remove and install tires and or wheel assemblies can result in personal injury or death.
Lower the implement to the ground.
Illustration 1 g01137553
Place Tooling (B) in front of the rear tires and behind the rear tires, as shown.
Illustration 2 g03563036
Position Tooling (A) under the front frame, as shown.
Use Tooling (A) to raise the front of the machine until the tires are off the ground.
Lock Tooling (A) in position.
Illustration 3 g00367814
Typical Example
Attach a suitable lifting device to tire (1), as shown. The combined weight of the tire and of the rim is approximately 1590 kg (3500 lb).
Remove the bolts (2) from the rim.Note: Do not damage the valve stem when the tire and the rim are removed.
Remove tire (1) and the rim as a unit.
Repeat this procedure for the opposite side.Installation Procedure
Install tire and rim (1) in the reverse order of removal.
Tighten bolts (2) to a torque 1000 125 N m (738 92lb ft).