BUSHING 1467395 - Caterpillar

1467395 BUSHING Caterpillar parts 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1467395
146-7395
1467395

Weight: 2 pounds 1 kg.

Information:

ID 120.189 mm

OD 128.189 mm

WIDTH 111.7 mm

Buy BUSHING 1467395 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK,

Compatible equipment models: 1467395:

TRUCK 793F 793F AC 793F CMD 793F OEM 793F XQ 795F AC 795F XQ 797 797B 797F Caterpillar

Number on catalog scheme:

Caterpillar 1467395 Parts scheme BUSHING

For full view, you need register

Information:

Illustration 14 g01218033Note: Tooling (F) is used for the removal and installation of bearing (8). Tooling (G) is used for the removal and installation of bearing (2). (3) Torque for the nut ... 7400 370 N m (5460 270 lb ft) (1) Torque for the bolts ... 367 55 N m (270 40 lb ft)Tighten the setscrew that retains nut (3) to a torque of 57 11 N m (42 8 lb ft).The slit of ring (5) must be in the direction of the piston.Apply Tooling (D) to seals (4) prior to assembly.Lubricate seals (6) with the lubricant that is being sealed.Apply Tooling (C) to the wiper seal (7) prior to assembly.Installation Procedure
Table 3
Required Tools
Tool Part Number Part Description Qty
A 4C-9485 Pin Driver Cap 1
Illustration 15 g01218011
Attach a suitable lifting device to boom cylinder (11), as shown. The weight of boom cylinder (11) is approximately 287 kg (632 lb). Position boom cylinder (11) onto the machine.
Illustration 16 g01218013
Install shims (17) and pin assembly (19) on the head end of boom cylinder (11). Install bolt (18).
Illustration 17 g01217921
Use the suitable lifting device in order to position boom cylinder (11) onto suitable cribbing. Reposition the suitable lifting device near the rod end of boom cylinder (11). The weight of boom cylinder (11) is approximately 287 kg (632 lb). Use the suitable lifting device to raise the rod end of boom cylinder (11) into position.
Illustration 18 g01218505
Illustration 19 g01217928
Install shim (16). Position pin (15) through the rod end of the boom cylinder.
Install spacer (14) (not shown). Install plate (13) and bolts (12).
Illustration 20 g01217915
Position valve assembly (10) and install bolts (9).
Illustration 21 g01217912
Position tube assembly (8) and install bolts (7).
Illustration 22 g01217908
Install support assemblies (5) and bolts (6).
Illustration 23 g01217906
Install clamps (4).
Illustration 24 g01217850
Install bolts (3).
Illustration 25 g01217839
Illustration 26 g01217840
Turn bolt (2) clockwise into the original position. Tighten nut (1).